7043-140 IBM RS/6000 43P Model 140
| Type Model |
Announced |
Available |
Marketing Withdrawn |
Service Discontinued |
Replaced By |
| 7043-140 |
1996/10/08 |
1996/11/08 |
- |
- |
- |
The RS/6000* 43P Series is a line of full-function desktop systems that deliver
performance and expansion capabilities at affordable prices. The 43P systems are versatile
and perform well as either workstations or entry workgroup servers. Selectable
microprocessor speeds plus a range of packaging options enable you to select the system
that works best for you.
The 43P Series leverages the personal computer technology from such common industry
technologies as PCI, ISA and SCSI-2. This enables you to use many of the high-performance
PCI adapters, low-priced ISA adapters, and readily available SCSI-2 devices.
The RS/6000 43P Model 140 is an outstanding graphics workstation and entry-level
workgroup server. This deskside system delivers strong performance at an affordable price.
It is well positioned as a graphics workstation for demanding high-performance 2D or
complex high-function 3D applications.
The Model 140 is powered by a PowerPC* 604e microprocessor running at your choice of
166MHz, 200MHz 233Mhz, or 332MHz and features a 1MB asynchronous Level 2 (L2) cache, 64MB
of Error Checking and Correcting (ECC) memory and 2.1GB internal SCSI-2 disk storage
standard.
- Powerful graphics capabilities - With comprehensive graphics support from entry
8-bit 2D to 24-bit true-color 2D, through high-performance 3D, the Model 140 is ready to
tackle everything from business graphics to demanding mechanical design applications. It
also has an integrated tablet port that satisfies many graphics application requirements,
such as CAD, without taking up a slot.
- Flexible and expandable - The standard configuration can expand to 768MB of ECC
memory, 18.1GB of SCSI-2 Fast/Wide internal disk capacity, and up to 291GB of SCSI-2 or
873GB of Serial Storage Architecture (SSA) external disk storage. The five disk/media bays
and five PCI expansion slots (two are shared PCI/ISA) provide extra room for adding
communications and graphics adapters.
- Easy 'plug-in' processor - Upgrading from a 166MHz system is as simple as
plugging in a 200MHz 233Mhz or 332MHz processor.
- Business multimedia capability - For quality business multimedia sound, use the
line in/line out audio ports to connect stereo headphones and a microphone directly to
your system.
- Enhanced network connectivity - Use the built-in 10BaseT Ethernet** port to
connect to your Ethernet network (no card or slot required). For increased performance,
install the optional 10/100Mbps Ethernet adapter.
The 43P Model 140 is a desktop system with outstanding performance at an affordable
price. A wide range of options, including three available processor speeds, enables you to
build a system that suits your workstation or workgroup server application environment.
And, with its outstanding graphics capability, the Model 140 is well positioned as a
graphics workstation for demanding 2D or complex high-function 3D applications.
The Model 140 comes standard with a 166MHz PowerPC 604e microprocessor, which is
upgradable to 200MHz or 233MHz. 233Mhz are upgradable to 332Mhz. The PowerPC 604e
processor has 32KB of instruction and data cache plus an additional 1MB of L2 cache to
provide even greater power.
The base Model 140 has 64MB of ECC memory that can be expanded to 768MB to address a
wide range of transaction processing and database needs. A broad selection of SCSI-2
Fast/Wide, UltraSCSI and SSA disk drives are available to store your vital information for
rapid retrieval.
The Model 140 includes a 1-2 user, full function AIX* Version 4.1.5 or Version 4.2.1
package at no additional charge.
The entry system comes with 2.1GB of internal disk storage that can be expanded to
18.1GB. If your needs continue to grow, you can add external storage for up to 291GB of
SCSI-2 or 873GB of SSA disk.
The system features five expansion slots to support your choice of affordable, fast
communications, graphics and storage controllers. There are three 32-bit PCI (Peripheral
Component Interconnect) and two shared 32-bit PCI/ISA (Industry Standard Architecture)
slots.
Rounding out the Model 140 are standard 8X CD-ROM and 3.5-inch diskette drives, and
integrated SCSI-2 Fast/Wide and Ethernet controllers. An integrated stereo audio
capability supports many business multimedia and sophisticated network applications. Audio
ports for line-in/line-out, headphone and microphone are provided.
RAS:
Expansion is important, but a system must provide the reliability, availability and
serviceability (RAS) to run most demanding tasks. Mainframe characteristics such as error
detection, reliable hardware components, optional high availability clusters, fault
management and concurrent diagnostics are part of every system. Each component was
selected based on its reliability. Extensive integration testing has been conducted to
ensure the highest possible quality. For example, the system and PCI busses have standard
parity checking. The main memory is all ECC which helps improve availability by
automatically correcting single bit errors.
An easy-to-read LED operator status panel on the front of the system helps improve
troubleshooting capability. The three-digit display shows the system status at all times.
The Model 140 also features concurrent diagnostics to help provide complete diagnostics
without requiring system shutdown.
AIX Version 4 can help protect your data by choosing disk mirroring or meta data
consistency in the Journal File System. Should a disk need to be replaced, you can swap it
in while the system is running, helping you avoid costly down time. You also can use
internal or external RAID subsystems.
For maximum high availability and horizontal growth, you can cluster the Model 140 with
other RS/6000 models. The RS/6000 HACMP (High Availability Cluster MultiProcessing)
software has been recognized by D.H. Brown as the leading UNIX** cluster solution.
Graphics Support:
For 2D graphics applications, the Model 140 offers a number of graphics accelerators.
The POWER GXT110P 2D accelerator meets the graphics needs of many commercial applications
and provides an entry point for workstation users. It is also a cost-effective choice for
server environments that require a graphical user console.
For high-levels of 2D graphics function and performance, you can choose either the
8-bit POWER GXT250P or the 24-bit true-color GXT255P graphics accelerator. In fact, the
combination of these graphics accelerators and AIX's Softgraphics 3D support for the
OpenGL and PHIGS 3D APIs enables you to run 24-bit entry-level 3D applications, such as
production CAD, at the price of a 2D system.
For more advanced 3D graphics capability, the Model 140 offers several options that
differ in their costs and speed of processing graphics data. The POWER GXT500P and GXT550P
graphics accelerators provide outstanding 3D accelerated functionality at an affordable
price and are well suited for wireframe and entry solid modeling applications. The higher
performing POWER GXT800P graphics accelerator has optional hardware texture mapping, which
is ideal for performing solid modeling and visualization. Externally attaching a POWER
GXT1000* graphics accelerator delivers IBM*'s highest function 3D graphics.
Year 2000 Readiness:
The Model 140 and its supported AIX operating system are Year 2000 ready. When used
with their associated documentation, they are capable of correctly processing, providing,
and/r receiving date data within and between the 20th and 21st centuries, provided all
other products (for example software, hardware and firmware) used with them properly
exchange date data.
Feature Availability Matrix
The following feature availability matrix for the IBM RS/6000 machine types uses the
letter "A" to indicate features that are available and can be ordered on the
specified models. "S" indicates a feature that is supported on the new model
during a model conversion; these features will work on the new model, but additional
quantities of these features cannot be ordered on the new model; they can only be removed.
"N" indicates that the feature is not supported on the new model and must be
removed during the model conversion. As additional features are announced, supported, or
withdrawn, this list will be updated. Please check with your Marketing Representative for
additional information.
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
US--->
0001 |A| After-market Order Indicator
<---US
US, CAN, AP, LA--->
1748 |A| Custom QuickShip Indicator
<---US, CAN, AP, LA
US--->
0600 |A| Aggregation Center Routing Indicator - Rochester
<---US
US, CAN--->
0986 |A| CCS Customer Service Specify (US)
<---US, CAN 2111 |A| PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
2112 |A| PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device | | Cable 2113 |A| PCI
SCSI Adapter To Single Port 8-Bit SE External Device | | Cable 2114 |A| PCI SCSI Adapter
16-Bit Differential External Y Cable 2115 |A| PCI SCSI Adapter To 2-Port, 16-Bit SE
External Device Cable 2116 |A| PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device
| | Cable 2117 |A| PCI SCSI Adapter 16-bit SE External Y Cable 2424 |A| 0.6M 16-bit SCSI-2
System to System Cable 2425 |A| 2.5M 16-bit SCSI-2 System to System Cable 2445 |A|
Internal Ultra SCSI Cable Assembly 2618 |A| 8X Speed Tray Loading CD-ROM 2619 |A| 20X
(Max) SCSI-2 CD-ROM Drive 2638 |A| Ultimedia Video Capture Adapter - PCI 2701 |A| 4-Port
Multiprotocol Communications Controller, ISA bus 2702 |A| Multiprotocol Attachment Cable -
V.35
EMEA--->
2703 |A| Multiprotocol Attachment Cable - V.35 (France)
<---EMEA 2704 |A| Multiprotocol Attachment Cable - X.21 2705 |A| 4-Port
Multiprotocol Interface Cable 2706 |A| Multiprotocol Modem Attachment Cable - EIA-232/V.24
2708 |A| Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter for PowerPC | | Systems 2709 |A| IBM
ARTIC960Hx 4-Port T1 RJ45 Cable 2710 |A| IBM ARTIC960Hx 4-Port E1 RJ45 Cable 2741 |A|
SysKonnect SK-NET FDDI-LP SAS PCI for PowerPC Systems 2742 |A| SysKonnect SK-NET FDDI-LP
DAS PCI for PowerPC Systems 2743 |A| SysKonnect SK-NET FDDI-UP SAS PCI for PowerPC Systems
2837 |A| MVP POWER Multi-Monitor Adapter 2838 |A| Power GXT120P Graphics Adapter - PCI
2839 |S| POWER GXT110P Graphics Adapter - PCI 2851 |A| POWER GXT250P Graphics Adapter -
PCI 2852 |A| POWER GXT255P Graphics Adapter - PCI 2853 |A| POWER GXT800P Graphics Adapter
- PCI 2854 |S| POWER GXT500P Graphics Adapter - PCI 2855 |A| POWER GXT550P Graphics
Adapter - PCI 2856 |S| IBM 7250 Attachment Adapter - PCI
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
2859 |A| POWER GXT800P with Texture Graphics Adapter - PCI
2861 |A| IBM ARTIC960Hx 4-Port EIA-232 Cable
2862 |A| IBM ARTIC960Hx 4-Port RS-449 Cable
2863 |A| IBM ARTIC960Hx 4-Port X.21 Cable
2864 |A| IBM ARTIC960Hx 4-Port X.35(DTE) Cable
2865 |A| IBM ARTIC960Hx 4-Port EIA-530 Cable
2900 |A| 4.5GB Ultra-SCSI 16-bit Disk Drive
2905 |A| 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
| | Select
2907 |A| 4.5GB Ultra-SCSI 16-bit Disk Drive Select
2908 |A| 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive
2910 |S| 9.1GB Ultra-SCSI 16-bit Disk Drive
2917 |S| 9.1GB Ultra-SCSI 16-Bit Disk Drive Select
2920 |A| IBM PCI Token-Ring Adapter
2931 |A| 8 Port Asynchronous Adapter - EIA-232, ISA Bus
2932 |A| 8-Port Asynchronous Adapter EIA-232/422A, ISA Bus
2933 |A| 128 Port Asynchronous Controller, ISA Bus
2934 |A| Asynchronous Terminal/Printer Cable EIA-232
2936 |A| Asynchronous Cable EIA-232/V.24
2943 |A| 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
2944 |A| 128-Port Asynchronous Controller, PCI bus
2945 |A| Asynchronous Terminal Cable - EIA-422A
2947 |A| IBM ARTIC960Hx 4-Port Selectable PCI Adapter
2948 |A| IBM ARTIC960Hx 4-Port T1/E1 PCI Adapter
2951 |A| 2-Port Cable, V.24 / EIA-232
2952 |A| 2-Port Cable, V.35
2953 |A| 2-Port Cable, V.36 / EIA-449
2954 |A| 2-Port Cable, X.21
2961 |A| X.25 Interface Co-processor Adapter, ISA Bus
2962 |A| 2-Port Multiprotocol PCI Adapter
2963 |A| TURBOWAYS 155 PCI UTP ATM Adapter
2965 |S| X.25 Attachment Cable X.21 - 3-Meter (10 FT.)
2966 |S| X.25 Attachment Cable V.24 - 3-Meter (10 FT.)
2967 |S| X.25 Attachment Cable V.35 - 3-Meter (10 FT.)
2968 |A| IBM 10/100 Mbps Ethernet PCI Adapter
2976 |A| X.25 Attachment Cable X.21 - 6-Meter (20 FT.)
2977 |A| X.25 Attachment Cable V.24 - 6-Meter (20 FT.)
2978 |A| X.25 Attachment Cable V.35 - 6-Meter (20 FT.)
2979 |S| PCI Auto LANstreamer Token Ring Adapter
2985 |A| PCI Ethernet BNC/RJ-45 Adapter
2986 |S| 3Com 10/100 Mbps PCI Fast EtherLink XL for PowerPC Systems
2987 |A| PCI Ethernet AUI/RJ-45 Adapter
2988 |A| TURBOWAYS 155 PCI MMF ATM Adapter
2998 |A| TURBOWAYS 25 ATM PCI Adapter
3000 |S| 4.5GB SCSI-2 F/W 1-Inch High Disk Drive
3007 |S| 4.5GB SCSI-2 F/W 1-inch (25mm) High Disk Drive Select
3010 |S| 9.1GB SCSI-2 F/W Disk Drive
3017 |S| 9.1GB SCSI-2 F/W Disk Drive Select
3034 |S| 4.5GB SCSI-2 F/W Disk Drive
3095 |A| 2.1GB SCSI-2 Fast/Wide Disk Drive
3098 |S| 2.1GB to 4.5GB SCSI-2 Fast/Wide Disk Drive Select
3124 |A| Serial to Serial Port Cable for Drawer/Drawer
3125 |A| Serial to Serial Port Cable for Rack/Rack
3612 |S| P50 Color Monitor
3613 |S| P70 Color Monitor
3614 |S| P200 Color Monitor
US, CAN, AP, EMEA--->
3615 |S| P201 Color Monitor
<---US, CAN, AP, EMEA
AP--->
3616 |A| IBM 9516 TFT LCD Color Monitor
<---AP 3617 |A| G52 Color Monitor, Northern Hemisphere 3618 |A| G52 Color
Monitor, Equatorial 3619 |A| G52 Color Monitor, Southern Hemisphere 3620 |A| IBM P72 Color
Monitor 3621 |A| IBM P92 Color Monitor 3622 |A| IBM P202 Color Monitor 3752 |A| Service
Package 3753 |A| Options Library (hard copy) 4042 |S| 0.5MB to 1MB L2 Cache Select 4085
|S| 1MB Synchronous L2 Cache 4101 |S| 64MB EDO DRAM DIMM Memory Select 4102 |A| 128MB EDO
DRAM DIMM Memory Select 4112 |A| 16MB EDO DRAM DIMM Memory 4113 |A| 32MB EDO DRAM DIMM
Memory
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
4114 |A| 64MB EDO DRAM DIMM Memory
4115 |A| 128MB EDO DRAM DIMM Memory
4213 |A| 13W3 to 15-Pin D-Shell Converter Cable
4214 |A| 13W3 to 60/77Hz Display Cable
4217 |A| 6091 Attachment Cable
4219 |A| 6091-19i (77Hz-ISO), POWERdisplay 17, 19, 20 Monitor Cable
4223 |A| Ethernet 10Base2 Transceiver
4234 |A| 13W3 to 13W3 Display Cable
4235 |A| 15 Pin-D Shell to 13W3 Display Cable
US, CAN, AP, EMEA--->
4237 |A| 13W3 to 15-pin DDC/ID Bits Switchable Display Cable
<---US, CAN, AP, EMEA 4238 |A| DDC 15 Pin to 13W3 Display Cable 4239 |A| 15-D
Adapter to 3BNC ID Cable 4240 |A| DDC 13W3 to 13W3 Display Cable 4241 |A| 13W3 to 13W3
DDC/ID Bits Switchable Display Cable 4310 |A| PowerPC 604e 200MHz Pluggable Processor
Select 4315 |A| PowerPC 604e 233MHz Pluggable Processor Select 4318 |A| PowerPC 604e
233MHz Pluggable Processor Upgrade 4316 |A| PowerPC 604e 200MHz Pluggable Processor
Upgrade 4346 |A| PowerPC 604e 332MHz Pluggable Processor Select 4347 |A| PowerPC 604e
332MHz Pluggable Processor Upgrade
US, AP, LA, EMEA--->
5005 |A| Software Preinstall
<---US, AP, LA, EMEA 5014 |S| Windows NT Server Indicator
CAN, AP--->
5006 |A| AIX Version 4 Client Preload 5008 |A| AIX Version 4 Server Preinstall (D5
Processor Group)
<---CAN, AP 6041 |A| 3-Button Mouse 6142 |A| 4GB/8GB 4MM Internal Tape Drive
6159 |A| 12/24GB 4mm Internal Tape Drive 6206 |A| PCI Single-Ended Ultra SCSI Adapter 6207
|A| PCI Differential Ultra SCSI Adapter 6208 |A| PCI SCSI-2 Fast/Wide Single-ended Adapter
6209 |A| PCI SCSI-2 Fast/Wide Differential Adapter 6215 |A| PCI SSA Multi-Initiator/RAID
EL Adapter 6218 |S| IBM PCI SSA 4-port RAID Adapter 6222 |A| SSA Fast-Write Cache Option
Card 6308 |A| Personal Microphone 6309 |A| Digital Trunk Quad PCI Adapter 6405 |S|
Amplified Speakers (US Power Supply)
EMEA--->
6406 |S| Amplified Speakers (UK Power Supply) 6407 |S| Amplified Speakers (European Power
Supply)
<---EMEA
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
AP--->
6408 |S| Amplified Speakers (AP/Australia Power Supply) 6409 |S| Amplified Speakers (Japan
Power Supply)
<---AP 6509 |A| Media Bay Disk Drive Mounting Kit 6600 |A| Quiet Touch Keyboard,
US English, #103P 6601 |A| Quiet Touch Keyboard, French, #189 6602 |A| Quiet Touch
Keyboard, Italian, #142 6603 |A| Quiet Touch Keyboard, German/Austrian, #129 6604 |A|
Quiet Touch Keyboard, UK English, #166 6605 |A| Quiet Touch Keyboard, Spanish, #172 6606
|A| Quiet Touch Keyboard, Japanese, #194 6607 |A| Quiet Touch Keyboard, Brazilian
Portuguese, #275 6608 |A| Quiet Touch Keyboard, Canadian French, #058 6609 |A| Quiet Touch
Keyboard, Belgian/UK-Flemish, #120 6610 |A| Quiet Touch Keyboard, Belgian/French, #120
6611 |A| Quiet Touch Keyboard, Swedish/Finnish, #153 6612 |A| Quiet Touch Keyboard,
Danish, #159 6613 |A| Quiet Touch Keyboard, Bulgarian, #442 6614 |A| Quiet Touch Keyboard,
Swiss,French/German, #150f/g 6616 |A| Quiet Touch Keyboard, Norwegian, #155 6617 |A| Quiet
Touch Keyboard, Dutch, #143 6618 |A| Quiet Touch Keyboard, Portuguese, #163 6619 |A| Quiet
Touch Keyboard, Greek, #319 6620 |A| Quiet Touch Keyboard, Hebrew, #212 6621 |A| Quiet
Touch Keyboard, Hungarian, #208 6622 |A| Quiet Touch Keyboard, Icelandic, #197 6623 |A|
Quiet Touch Keyboard, Polish, #214 6624 |A| Quiet Touch Keyboard, Romanian, #446 6625 |A|
Quiet Touch Keyboard, Slovakian, #245 6626 |A| Quiet Touch Keyboard, Czech, #243 6627 |A|
Quiet Touch Keyboard, Turkish, #179 6628 |A| Quiet Touch Keyboard, Turkish, #440 6629 |A|
Quiet Touch Keyboard, LA Spanish, #171 6630 |A| Quiet Touch Keyboard, Arabic, #238 6632
|A| Quiet Touch Keyboard, Serbian-Cyrillic, #118 6633 |A| Quiet Touch Keyboard, Korean,
#413 6634 |A| Quiet Touch Keyboard, Chinese/US, #467 6635 |A| Quiet Touch Keyboard, French
Canadian, #445 6636 |A| Quiet Touch Keyboard, Thailand, #191 6638 |A| Quiet Touch
Keyboard, Russian, #443 6639 |A| Quiet Touch Keyboard, Croatian, #105 6640 |A| Quiet Touch
Keyboard, US English ISO9995, #103P(EMEA) 6900 |S| Enhanced Keyboard - U.S. English (103P)
US, CAN, EMEA--->
6901 |S| Enhanced Keyboard - French (189) 6903 |S| Enhanced Keyboard - German/Austrian
(129)
<---US, CAN, EMEA
CAN, EMEA--->
6902 |S| Enhanced Keyboard - Italian (142) 6904 |S| Enhanced Keyboard - U.K. English (166)
<---CAN, EMEA
US, CAN, LA, EMEA--->
6905 |S| Enhanced Keyboard - Spanish (172)
<---US, CAN, LA, EMEA
US, CAN, AP, EMEA--->
6906 |S| Enhanced Keyboard - Japanese (194)
<---US, CAN, AP, EMEA
CAN, LA--->
6907 |S| Enhanced Keyboard - Brazilian/Portuguese (275)
<---CAN, LA
US, CAN--->
6908 |S| Enhanced Keyboard - Canadian French (058)
<---US, CAN
CAN, EMEA--->
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
6909 |S| Enhanced Keyboard - Belgian Dutch (120)
6910 |S| Enhanced Keyboard - Belgian French (120)
6911 |S| Enhanced Keyboard - Swedish/Finnish (153)
6912 |S| Enhanced Keyboard - Danish (159)
6913 |S| Enhanced Keyboard - Bulgarian (442)
6914 |S| Enhanced Keyboard - Swiss French (150F)
6915 |S| Enhanced Keyboard - Swiss German (150G)
6916 |S| Enhanced Keyboard - Norwegian (155)
6917 |S| Enhanced Keyboard - Dutch (143)
6918 |S| Enhanced Keyboard - Portuguese (163)
6919 |S| Enhanced Keyboard - Greek (319)
6920 |S| Enhanced Keyboard - Hebrew (212)
6921 |S| Enhanced Keyboard - Hungarian (208)
6922 |S| Enhanced Keyboard - Icelandic (197)
6923 |S| Enhanced Keyboard - Polish (214)
6924 |S| Enhanced Keyboard - Romanian (446)
6925 |S| Enhanced Keyboard - Slovak (245)
6926 |S| Enhanced Keyboard - Czechoslovakian (243)
6927 |S| Enhanced Keyboard - Turkish (179)
6928 |S| Enhanced Keyboard - Turkish (440)
<---CAN, EMEA
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
CAN, EMEA--->
6930 |S| Enhanced Keyboard - Arabic (253)
<---CAN, EMEA
CAN, AP--->
6933 |S| Enhanced Keyboard - Korean 6935 |S| Enhanced Keyboard - Traditional Chinese
<---CAN, AP
US, CAN, AP, LA--->
8130 |A| Remote Asynchronous Node 16-Port EIA-232 (US)
<---US, CAN, AP, LA 8131 |A| 128-Port Asynchronous Controller Cable, 4.5 Meter
8132 |A| 128-Port Asynchronous Controller Cable, 23cm (9-Inch) 8133 |A| RJ-45 to DB-25
Converter Cable
AP, LA, EMEA--->
8134 |A| Remote Asynchronous Node 16-Port EIA-232 (WT)
<---AP, LA, EMEA 8135 |A| 64-Port to 128-Port Pin-Out Converter 8136 |A| Rack
Mountable Remote Asynchronous Node 16-Port EIA-232 8137 |A| Enhanced Remote Asynchronous
Node 16-Port EIA-232 8138 |A| Enhanced Remote Asynchronous Node 16-Port RS-422 8227 |A|
Tie-down Strap Security Device 9004 |A| Southern Hemisphere Specify for Monitors 9053 |S|
Base 512KB Synchronous L2 Cache 9073 |S| Base 64MB EDO DRAM DIMM Memory 9074 |S| Base 32MB
EDO DRAM DIMM Memory 9075 |A| Base 64MB EDO DRAM DIMM Memory 9294 |A| Base PowerPC 604e
166MHZ Pluggable Processor 9300 |A| Language Group Specify - US English 9395 |A| 2.1GB
SCSI-2 Fast/Wide Disk Drive Specify
CAN, LA, EMEA--->
9700 |A| Language Group Specify - Dutch 9701 |A| Language Group Specify - Danish
<---CAN, LA, EMEA
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
CAN, LA, EMEA--->
9702 |A| Language Group Specify - Finnish 9703 |A| Language Group Specify - French 9704
|A| Language Group Specify - German 9705 |A| Language Group Specify - Polish 9706 |A|
Language Group Specify - Norwegian 9707 |A| Language Group Specify - Portuguese 9708 |A|
Language Group Specify - Spanish 9709 |A| Language Group Specify - Swedish 9710 |A|
Language Group Specify - United Kingdom 9711 |A| Language Group Specify - Italian
<---CAN, LA, EMEA
US, CAN, LA--->
9712 |A| Language Group Specify - Canadian French
<---US, CAN, LA 9719 |A| Language Group Specify - Hungarian
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
CAN, LA, EMEA--->
9713 |A| Language Group Specify - French/Belgian
<---CAN, LA, EMEA
CAN, AP, LA--->
9714 |A| Language Group Specify - Japanese 9715 |A| Language Group Specify - Taiwan 9716
|A| Language Group Specify - Korean
<---CAN, AP, LA 9800 |A| Power Cord Specify - United States/Canada
CAN, AP, LA, EMEA--->
9820 |A| Power Cord Specify - Belgium, Finland, France (250V, 16A)
<---CAN, AP, LA, EMEA
CAN, LA, EMEA--->
9821 |A| Power Cord Specify - Denmark (250V, 10A)
<---CAN, LA, EMEA
CAN, AP, LA, EMEA--->
9825 |A| Power Cord Specify - United Kingdom (250V, 13A)
<---CAN, AP, LA, EMEA
CAN, LA, EMEA--->
9827 |A| Power Cord Specify - Israel (250V, 6-16A) 9828 |A| Power Cord Specify -
Switzerland (250V, 10A)
<---CAN, LA, EMEA
CAN, AP, LA, EMEA--->
9829 |A| Power Cord Specify - South Africa/Pakistan (250V, 16A)
<---CAN, AP, LA, EMEA
|1| A = AVAILABLE S = SUPPORTED
|4| N = NOT SUPPORTED, MUST BE REMOVED
|0|
| |
FEAT/PN | | DESCRIPTION
--------|-|-----------------------------------------
CAN, LA, EMEA--->
9830 |A| Power Cord Specify - Italy (250V, 10A and 16A)
<---CAN, LA, EMEA
CAN, AP, LA--->
9831 |A| Power Cord Specify - Argentina (250V, 10A) 9833 |A| Power Cord Specify - Thailand
(250V, 15A)
<---CAN, AP, LA
CAN, LA--->
9834 |A| Power Cord Specify - Uruguay (250V, 10A)
<---CAN, LA
The Model 140 is an entry-level to midrange graphics workstation. It is also an
entry-level workgroup server. The Model 140 is the natural extension of the 43P line and
should be viewed as the replacement for previously announced 43P 100, 120, 132 models. It
is the natural upgrade path for existing 25X customers. With the aggressive base
configuration price, the added functionality, and the extensive range of 2D and 3D
graphics, the Model 140 can improve performance over the previously available 43P models.
Processor Clock System Internal Maximum
Model Type Rate Memory Storage CD-ROM Slots/Bays
----- ------------ ------ ----------- ------------ ------ ----------
140 PowerPC 604e 166MHz 64MB/768MB 2.1GB/18.1GB 8X 5 / 5
Not applicable.
The Model 140 is customer setup.
In the U.S., installation assistance for the system and features/options is available
during the warranty period by calling 1-800-IBM-SERV.
At the customer's request, IBM will perform the CSU tasks on the system unit or
features for an additional fee.
External Storage Machines
- 3590-B1A -- Magstar 3590 Tape Subsystem
- 3590-B11 -- Magstar 3590 Tape Subsystem
- 3590-C12 -- Magstar 3590 Silo Compatible Tape Subsystem
- IBM 3490 Model F00 Single Unit Tape Drive with Differential
- IBM 3490 Model F01 Floor Model Tape Drive with Differential
- IBM Magstar MP 3570 Tape Drive Model B1A
- IBM 3570 Model B02 Two Drive Tape Subsystem
- IBM Magstar MP 3570 Model C00 Tape Subsystem
- IBM Magstar MP 3570 Model C01 Tape Subsystem
- IBM Magstar MP 3570 Model C02 Tape Subsystem
- IBM Magstar MP 3570 Model C11 Tape Subsystem
- IBM Magstar MP 3570 Model C12 Tape Subsystem
- IBM Magstar MP 3575 Tape Library Dataserver
- IBM Magstar MP 3575 Tape Library Dataserver Model L06
- IBM Magstar MP 3575 Tape Library Dataserver Model L12
- IBM Magstar MP 3575 Tape Library Dataserver Model L18
- IBM Magstar MP 3575 Tape Library Dataserver Model L24
- IBM Magstar MP 3575 Tape Library Dataserver Model L32
- IBM 3995 Model C60 2.6GB Drive External Optical Library
- IBM 3995 Model C62 Optical Library
- IBM 3995 Model C64 Optical Library
- IBM 3995 Model C66 Optical Library
- IBM 3995 Model C68 Optical Library
- IBM 7131 Model 105 SCSI Multi-storage Tower (Note 1)
- IBM 7131 Model 405 SSA Disk Subsystem Tower
- IBM 7133 Model 500 SSA Disk Subsystem Tower
- IBM 7133 Model 600 SSA Disk Subsystem Tower
- IBM 7137 Model 412 1.1GB External Disk Array (Note 1)
- IBM 7137 Model 413 2.2GB External Disk Array (Note 1)
- IBM 7137 Model 414 4.5GB External Disk Array (Note 1)
- IBM 7137 Model 415 Disk Array Subsystem - Deskside Model
- IBM 7203 Model 001 Portable Disk Unit
- IBM 7204 Model 112 1.1GB External Disk Drive
- IBM 7204 Model 113 2.2GB External Disk Drive
- IBM 7204 Model 114 4.5GB External Disk Drive
- IBM 7204 18.2 GB External Disk Drive Model 118
- IBM 7204 Model 139 9.1GB External Disk Drive
- IBM 7204 Model 215 2.0GB External Disk Drive
- IBM 7204 Model 010 1.0GB External Disk Drive
- IBM 7204 Model 315 2.0GB External Disk Drive
- IBM 7204 Model 317 2.2GB External Disk Drive
- IBM 7204 Model 325 4.5GB External Disk Drive
- IBM 7204 Model 339 9.1GB External Disk Drive
- IBM 7204 Model 402 2.2GB External Disk Drive
- IBM 7204 Model 404 4.5GB External Disk Drive
- IBM 7204 18.2 GB External Disk Drive Model 418
- IBM 7205 Model 311 35GB External Digital Linear Tape Drive
- IBM 7206 Model 005 4.0GB External 4mm Tape Drive
- IBM 7206 Model 110 12 GB External 4mm DDS-3 Tape Drive
- IBM 7207 Model 011 525MB Ext 1/4-Inch Cartridge Tape Drive
- IBM 7207 Model 012 1.2GB Ext 1/4-Inch Cartridge Tape Drive
- IBM 7207 Model 315 13GB Ext 1/4-Inch Cartridge Tape Drive
- IBM 7208 Model 011 5.0GB 8mm Tape Drive
- IBM 7208 Model 341 20GB External 8mm Tape Drive
- IBM 7209 Model 002 1.19GB R/W Optical Disk Drive
- IBM 7209 Model 003 2.6GB External Optical Disk Drive
- IBM 7210 Model 010 External CD-ROM Drive
- IBM 7210 Model 015 External CD-ROM Drive
- IBM 7331 Model 205 5GB External 8mm Tape Library
- IBM 7331 Model 305 8mm Tape Library
- IBM 7332 Model 005 External 4mm Autoloader
- IBM 7332 Model 110 4mm DDS-3 Tape Cartridge Autoloader
- IBM 7336 Model 205 External 4mm Library
- IBM 7337 Model 305 Digital Tape Library
- IBM 7337 Model 306 Digital Tape Library
- IBM 9348 Model 012 Ext 1/2-Inch Tape Library
Note: (1) Requires dedicated SCSI I/O Controller.
Some devices may require AIX Version 4 Server. Refer to AIX Operating System
Documentation for specific support requirements.
Printers, Plotters, ASCII Terminals
These devices are all supported through standard ports. Refer to the list of supported
devices in the AIX Sales Manual for system documentation for your system.
IBM Displays
- P50 Color Monitor (#3612) (featuring a Trinitron** CRT) has a maximum viewable image
size of 13.6 inches/346mm measured diagonally.
- P70 Color Monitor (#3613) (featuring a Trinitron** CRT) has a maximum viewable image
size of 15.9 inches/403mm measured diagonally.
- P200 Color Monitor (#3614) (featuring a Trinitron** CRT) has a maximum viewable image
size of 19.1 inches/486mm measured diagonally.
- P201 Color Monitor (#3615) (featuring a Trinitron** CRT) has a maximum viewable image
size of 19.1 inches/486mm measured diagonally.
- POWERdisplay 17 (#3607) has a maximum viewable image size of 16.1 inches/409mm measured
diagonally.
- POWERdisplay 20 (#3608) has a maximum viewable image size of 19.1 inches/486mm measured
diagonally.
- IBM 6091-19i Color Display (1280 x 1024 60 Hz, 77 Hz) has a fixed image size of 17.3
inches/439mm measured diagonally. (GXT110P not supported)
AP--->
- IBM 5566-001 Color Display
<---AP
DEVICES SUPPORTED - AIX VERSION 4 ONLY
Graphics Accelerators
- IBM 7250 POWER GXT1000 Model 002
X Stations
- IBM 7010 Model 120
- IBM 7010 Model 130
- IBM 7010 Model 140
- IBM 7010 Model 150
- IBM 7010 Model 160
Communication Servers
- IBM 7318 Model P10 Serial Communication Network Server
- IBM 7318 Model S20 Serial Communication Network Server
Graphics Device
- IBM 6094 Peripheral Adapter Connector
Dials
- IBM 6094-010 - requires 6094 feature #4060 for attachment to a standard serial port.
6094 feature #4061 may also be required.
Lighted Programmable Function Keyboard
- IBM 6094-020 - requires 6094 feature #4060 for attachment to a standard Serial Port.
6094 feature #4061 may also be required.
3D Input Device
- IBM 6094 Spaceball Model 30 (Dials Emulation)
- IBM 6094 Spaceball Model 40 (No Dials Emulation)
Tablets
- IBM 6093 Tablet Model 011 (requires 6093 cable feature #4015)
- IBM 6093 Tablet Model 012 (requires 6093 cable feature #4015)
None.
National languages supported by the Model 140 built-in menus and diagnostic support:
- Belgian Dutch
- English
- French
- German
- Italian
- Norwegian
- Spanish
- Swedish
The non-English language menus are supported on:
- Any supported display attached directly to a supported graphics adapter installed in the
Model 140.
- The subset of supported ASCII terminals that use the International Standards
Organization (ISO) 8859-1 code page. IBM ASCII terminals that use ISO 8859-1 include the
IBM 3151, 3161, 3162, 3163, and 3164.
- Non-IBM ASCII terminals that support ISO 8859-1 include, but are not limited to, DEC
VT320 and DEC VT330.
See "No Charge Specify Codes" for more information.
- Width: 420 mm (16.5 in)
- Depth: 460 mm (18.1 in)
- Height: 165 mm (6.5 in)
- Weight: 14.5 kg (32 lb) Base system
- Weight: 18.0 kg (40 lb) Full featured
Thermal Output:
- 233 joules/sec (796 BTU/ hr) (maximum configuration)
Noise Level and Sound Power:
- 5.3 Bel sound power (operating - upper limit, typical configuration)
- 5.0 Bel sound power (idle - upper limit, typical configuration)
- 38 dBA sound pressure - operating (mean one-meter position)
- 36 dBA sound pressure - idle (mean one-meter position)
EMC Conformance Classification:
USA FCC Class B
Japan VCCI-2
Europe CISPR 22 Class B
Korea Korean Requirement Class B; "CE" Mark of Conformity
Note: A system configured with any one of these feature numbers -- 3615, 6218,
8130, or 8134 -- constitutes a Class A system.
Note: A configuration using more than one SysKonnect FDDI adapter (feature 2741,
2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI),
constitutes a Class A system.
AP--->
Power Factor Correction:
A Power Factor Correction (PFC) power supply that conforms to IEC-1000-3-2 is available
for the Japan market.
<---AP
Homologation: Telecom Environmental Testing (Safety and EMC)
Homologation approval for specific countries has been initiated with the IBM
Homologation and Type Approval (HT&A) organization in LaGaude, France.
This RS/6000 model and applicable features meet the environmental testing requirements
of the country TELECOM and have been designed and tested in compliance with the Full
Quality Assurance Approval (FQAA) process as delivered by the British Approval Board for
Telecom (BABT), the UK Telecom Regulatory authority.
ISO 9000:
Supported IBM monitors compliant with ISO 9241 Part 3:
Feature
Number Maximum Viewable
Machine Screen Size
Description Type/Mod Measured Diagonally
------------------------------- ---------- -------------------
IBM P50 Color Monitor 3612 346 mm/13.6 in
IBM P70 Color Monitor 3613 403 mm/15.9 in
IBM P200 Color Monitor 3614 486 mm/19.1 in
IBM P201 Color Monitor 3615 486 mm/19.1 in
P50 UV-N MPR-II Color Monitor 6553-503 346 mm/13.6 in
P50 UV-N TCO-92 Color Monitor 6553-523 346 mm/13.6 in
P70 UV-N Color Monitor 6554-673 403 mm/15.9 in
P200 UV-N Color Monitor 6555-773 486 mm/19.1 in
US, EMEA--->
16-inch UV LCD Color Monitor 9516-A03 408 mm/16.1 in
<---US, EMEA
AP--->
16-inch UV LCD Color Monitor 9516-A04 408 mm/16.1 in
<---AP
US, CAN, AP, EMEA--->
P201 DV-N Color Monitor 6555-803 486 mm/19.1 in
<---US, CAN, AP, EMEA
AP, LA, EMEA--->
P50 UV-S MPR-II Color Monitor 6553-504 346 mm/13.6 in P70 UV-S MPR-II Color Monitor
6554-674 403 mm/15.9 in P200 UV-S Color Monitor 6555-774 486 mm/19.1 in
<---AP, LA, EMEA
Product Safety/Country Testing/Certification:
U.S.A. - UL
Canada - CNL (CSA or cUL)
Germany/Europe - GS Mark (Safety, TUV, EN60 950)
Temperature: 16 to 32 degrees C (60 to 90 degrees F)
Relative Humidity: 8% to 80%
Maximum Altitude: 7000 ft
Wet Bulb: 23 degrees C (73 degrees F)
Operating Voltages: 100-127 volts AC 50/60 Hz
200-240 volts AC 50/60 Hz
Electrical Output: 250 watts
Power Source Loading 0.2 KVA (typical configuration)
0.4 KVA (maximum configuration)
System Memory
Base system memory and optional system memory reside on the system planar. Base memory
configuration is two 32MB EDO ECC Memory DIMMs. Memory DIMMs do not have to be installed
in pairs, and sizes can be mixed. A select feature can be ordered to replace this base
memory with a 128MB EDO ECC DIMM. Additional DIMMs in capacities of 16MB, 32MB, 64MB, and
128MB can be ordered in any mix up to a total of six.
Feature
Number Memory Feature Height
------ -------------- ------
9073 2X32MB DIMM (Base) 1.0 in
4102 128MB DIMM (Select) 1.25 in
4112 16MB DIMM 1.0 in
4113 32MB DIMM 1.0 in
4114 64MB DIMM 1.25 in
4115 128MB DIMM 1.25 in
Storage Devices/Bays
Base configuration includes the 600MB, 5.25-inch, 8X CD-ROM drive in bay 2, the 1.44MB,
3.5-inch diskette drive in bay 1, and the 2.1GB, 16-bit SCSI hard drive in bay 4.
Bay 3 is a front-accessible optional storage bay. Any of the hard drives, a second
CD-ROM drive, or tape drive can be requested for bay 3. If a 3.5-inch hard drive is
selected then the mounting kit (#6509) is required.
The table below shows the supported hard disk drive (HDD) and bay configurations:
Bay Number and Size HDD Capacity
| 2.1GB | 4.5GB | 9.1GB | _______________|_______|_______|_______| Bay 3 (43 mm) | Y |
Y | Y | _______________|_______|_______|_______| Bay 4 (25 mm) | Y | Y | N |
_______________|_______|_______|_______| Bay 5 (25 mm) | Y | Y | N |
_______________|_______|_______|_______|
Note: Y = supported and N = not supported.
Feature Number Device Size Bay(s)
-------------- ------ ---- -----
Base 1.44MB Diskette 3.5-in. 1
Base 600MB 8X CD-ROM 5.25-in. half 2
2618 600MB 8X CD-ROM 5.25-in. half 3
9395 2.1GB Disk Drive 3.5-in. slim 4
3095 2.1GB Disk Drive 3.5-in. slim 5,3 with kit
2900 4.5GB Disk Drive 3.5-in. slim 5,3 with kit
2907 4.5GB Disk Drive 3.5-in. slim 4
2910 9.1GB Disk Drive 3.5-in. half 3 with kit
2917 9.1GB Disk Drive 3.5-in. half 3 with kit
6142 4.0GB Tape Drive 5.25-in. half 3
6149 12GB Tape Drive 5.25-in. half 3
Note: Only one 9.1GB disk drive can be installed in the Model 140 and it must go
in bay 3 with a mounting kit.
Slots/Adapters
The Model 140 has a unique dual-bus riser card that can accommodate up to five feature
adapters based on the PCI or ISA bus. The slots can support PCI or ISA adapters based on
the following limitations:
- Slots 1, 4, and 5 are PCI only slots
- Slots 2 and 3 are shared slots that can support either a PCI or ISA adapter
- Slots 1 and 2 are connected to the primary PCI bus on the planar
- Slot 3 is a shared slot that supports ISA or PCI on the secondary bus provided by the
bridge chip on the riser card
- Slot 4 and 5 are PCI ONLY slots on the secondary PCI bus provided by the bridge chip on
the riser card
- Slot 5 on the back side of the riser is limited to a half-length adapter
- Adapters on the secondary PCI bus slots (3, 4, 5) will run slightly slower than the
primary slots
Multiple Graphics Adapter Support
Priority Adapter Feature Slot Location Size
-------- ------- ------- ------------- ----
1 GXT800P 2859 2 only (one max) Long
1 GXT800P 2853 2 only (one max) Long
2 GXT500P 2854 2 only (one max) Long
2 GXT550P 2855 2 only (one max) Long
3 GXT250P 2851 1,2 (two max) Short
3 GXT255P 2852 1,2 (two max) Short
4 7250 Att Adapter 2856 1,2 (one max) Long
5 GXT110P 2839 1,2 (two max) Short
6 MVP Power Multi-
Monitor Adapter 2837 2 (one max) Long
The following graphics restrictions apply:
- Graphics adapters have higher priority than I/O adapters
- A maximum of two graphics adapters can be installed, and they must be installed in the
primary slots (slot 1 or 2)
- Only one of the following adapters can be installed in the 7043-140 system at a time:
GXT500P, GXT550P, GXT800P, or 7250 Attachment Adapter.
- GXT500P must be installed in the second slot, and slot 1 will be limited to a
half-length or shorter I/O adapter
- GXT800P must be installed in slot 2, and slots 1 and 5 will be limited to a half-length
or shorter adapter. Slots 3 and 4 will not be available
- A "short" length adapter is less than 6.6 inches
- A "long" length adapter is 6.6 inches or longer
I/O Adapters
Feat I/O Adapter Bus Form Slots ---- ----------- --- ----- ----- 2701 4-Port
Multiprotocol Com Ctrl ISA Long 3,2 (2 max) 2741 SysKonnect FDDI-LP SAS PCI Short
5,4,3,2,1 (2 max) 2742 SysKonnect FDDI-LP DAS PCI Short 5,4,3,2,1 (2 max) 2743 SysKonnect
FDDI-UP SAS PCI Short 5,4,3,2,1 (2 max) 2931 8-Port Asynchronous Adapter ISA Long 3,2 (2
max) 2932 8-Port Asynchronous Adapter ISA Long 3,2 (2 max) 2933 128-Port Asynchronous
Adapter ISA Long 3,2 (2 max) 2961 X.25 Interface Co-processor Ad ISA Long 3,2 (2 max) 2979
Auto LANstreamer Token-Ring PCI Short 5,4,3,2,1 (4 max) 2985 PCI Ethernet PCI Short
5,4,3,2,1 (2 max) 2986 3Com Fast EtherLink XL PCI Short 5,4,3,2,1 (4 max) 2987 PCI
Ethernet PCI Short 5,4,3,2,1 (2 max) 6208 PCI SCSI-2 Fast/Wide Single-End PCI Short
5,4,3,2,1 (2 max) 6209 PCI SCSI-2 F/W Differential PCI Short 5,4,3,2,1 (2 max) 6206
Single-Ended Ultra SCSI PCI Short 5 (int. 1 max) 4,3 (ext. 2 max) 6207 Differential Ultra
SCSI PCI Short 4,3,2 (2 max) 6218 SSA 4-Port RAID PCI Long 2 (1 max) 2998 Turboways 25 ATM
PCI Short 5,4,3,2,1 (4 max) 2962 2-Port Multiprotocol PCI Short 5,4,3 (2 max) 2708 Eicon
ISDN DIVA PRO PCI Long 5,4,3,2,1 (1 max) 2943 8-Port Asynchronous Adapter PCI Short
5,4,3,2,1 (2 max) 2944 128-Port Asynchronous Ctrlr PCI Short 5,4,3,2,1 (2 max) 6215 4-Port
SSA RAID PCI Long 2 (1 max) 2963 Turboways 155 UTP ATM PCI Short 5,4,3,2,1 (2 max) 2988
Turboways 155 MMF ATM PCI Short 5,4,3,2,1 (2 max) 2968 10/100 Ethernet PCI Short 5,4,3,2,1
(4 max) 6309 Digital Trunk Quad Adapter PCI Long 4,3,2 (1 max) 2947 IBM ARTIC960Hx 4-Port
Selectable PCI Long 4,3,2 (3 max) 2948 IBM ARTIC960Hx 4-Port T1/E1 PCI Long 4,3,2 (3 max)
2949 IBM ARTIC960Hx DSP Resource PCI Long 4,3,2 (3 max) 2920 PCI Token Ring PCI Short
5,4,3,2,1 (4 max)
Storage Limitations
- Integrated SCSI-2 Fast/Wide I/O Controller for up to four internal and two external SCSI
or SCSI-2 Fast/Wide Devices (16-bit)
Either an ASCII terminal with attachment cable or a graphics display with attachment
cable and graphics adapter is required for initial set up and must be available locally
for service. If an ASCII terminal is used, it must be attached through serial port S1.
If a graphics adapter is installed, console messages (IPL progress/error
information/systems management information) will be directed to the graphics adapter. The
system does not detect if a display is attached to the adapter. The user may attach any
supported device to the adapter.
If a graphics adapter is not installed, console messages (IPL progress/error
information/systems management information) will be directed to serial port S1. The system
does not detect if an ASCII display is attached to serial port S1. Use of any device other
than an ASCII display on serial port S1 will result in lost messages and unpredictable
results on that device.
Boot Devices
The system may be booted from CD-ROM, internal or external hard disk, or network booted
using internal Ethernet (#2985, #2986, or #2987) or Token Ring (#2979) adapters.
When a new system is ordered, the boot hardfile and all non-Ultra SCSI devices will
always be connected to the integrated SCSI. If a PCI Single-Ended Ultra SCSI Adapter
(#6206), an Internal Ultra SCSI Cable Assembly (#2445) and more than one hardfile are
ordered, then all secondary (non-boot) hardfiles will be connected to the PCI Single-Ended
Ultra SCSI Adapter (#6206).
Cables Required for Use with Displays
Refer to the following table to determine the appropriate IBM cable feature number to
order for the Model 140. Note that in some cases, the appropriate cable is either included
with the monitor or is ordered with the graphics subsystem.
Cable Requirements
The following chart shows the cable feature to graphics adapter reference. Check your
specific system model to determine which graphics adapters are supported on the model.
Display Cable Feature Number Matrix ----------------------- Graphics Adapters
------------------ GXT120P/ GXT250P/ GXT500P/ GXT800M/ GXT110P GXT150M GXT255P GXT550P
GXT800P GXT1000 7250 Displays (15D/DDC) (13W3) (15D/DDC) (13W3/DDC)(15D/DDC) (13W3) (13W3)
-------- --------- -------- -------- ---------- -------- ------ ------ G52 (1) Display NS
NS NS NS NS NS Display NS NS NS NS NS NS Display NS NS NS NS NS NS P50 (1) Display 4213(3)
Display 4213 Display NS NS P70 4238 4234 4238 4240 4238 4234 4234 P200 4238 4234 4238 4240
4238 4234 4234 P201 4237 4234 4237 4241 4237 4234 4234 P72 (1) Display 4213(3) Display
4213 Display NS NS P92 (2) Display 4234 Display 4240 Display 4234 4234 P202 (2) Display
4234 Display 4240 Display 4234 4234 6091-19I NS 4214 4239 4219 4239 3252 3252 @ POWERDP17
4217 4214 4239 4219 4239 3253 3253 @ POWERDP20 4217 4214 4239 4219 4239 3253 3253 @ 9516
4217 4214 4217 4214 4217 4214 3250 @
Notes:
- NS = Not Supported - This display/adapter combination is not supported.
- Display - The appropriate cable is included with the display.
- @ - Order under machine type 7250
- (1) Captured 15-pin D-shell cable
- (2) Dual input 15-pin D-shell and 13W3 soft switchable via screen menu; Ships with
15-pin D-shell
- (3) An ID bit adapter (P/N 96G2693) will shipped with every P72 when ordered with the
GXT150M.
- The P200/P201 has a maximum viewable image size of 19.1 inches/486mm measured
diagonally.
- The P70 has a maximum viewable image size of 15.9 inches/403mm measured diagonally.
- The P50 has a maximum viewable image size of 13.6 inches/346mm measured diagonally.
- The 6091-019i display has a fixed image size of 17.3 inches/439mm measured diagonally.
- The POWERdisplay 20 has a maximum viewable image size of 19.1 inches/486mm measured
diagonally.
- The POWERdisplay 17 has a maximum viewable image size of 16.1 inches/409mm measured
diagonally.
The Model 140 requires AIX Version 4.1.5 or Version 4.2.1. It can be configured without
a keyboard, mouse, or graphics adapter.
AIX applications written for POWER-based RS/6000 workstations will run on Model 140
without recompilation. The only exception to this is applications written using kernel
extensions that use certain privileged assembler instructions. IBM is not aware of any
applications using these instructions. Additional performance can be achieved by
recompiling with the latest versions of the IBM XL compilers to further exploit the
PowerPC technology.
AIX applications compiled using compiler options to exploit either the PowerPC
technology or POWER2 technology may not function properly on systems that do not employ
those technologies. Customers with any combination of POWER-, POWER2- and PowerPC
601-based or 604-based systems can continue to run their applications unmodified. New
applications and recompilation of existing applications for use in a mixed processor
environment should be compiled using the common mode options available in the new XL
compilers or any other compilers that support those options.
Note: When ordering feature #2968 (IBM 10/100 Mbps Ethernet PCI Adapter) as part
of a factory system order and software has been preloaded, the appropriate device driver
for the feature will be shipped. New AIX customers who choose not to have the system order
preloaded with software need to select backup media. This insures that the appropriate
feature device driver will be included. Existing customers with AIX software who do not
have an AIX Update CD should place an MES software order to obtain the appropriate refresh
of AIX Update CD.
The following publications are shipped with the product. Additional copies are
available for a fee.
TITLE ORDER NUMBER
---------------------------------------------- ------------
IBM RS/6000 7043 43P Series Models 140 and 240 SA38-0510
Setup Instructions
IBM RS/6000 7043 43P Series Models 140 and 240 SA38-0511
User's Guide
PCI Adapter Placement Reference SA38-0538
System Unit Safety Information SA23-2652
CAN, AP, LA, EMEA--->
The following publications are available from the Software Publications Center (SPC).
If translated publications are not available, U.S. English publications will be shipped
instead of the national language publications. National language publications will be
shipped, when available, to customers who ordered national language publications but
received U.S. English. Contact your IBM representative to determine availability date.
TITLE Order Number Language
-------------------------------------------- ------------ -----------
IBM RS/6000 7043 43P Series Models 140 and 240
Setup Instructions (SA38-0510) SA13-1924 Italian
SA11-1403 French
SA12-4603 German
SA88-6786 Japanese
SA10-9375 Spanish
IBM RS/6000 7043 43P Series Models 140 and 240
User's Guide (SA38-0511) SA11-1430 French
SA12-4604 German
SA88-6787 Japanese
SA10-9376 Spanish
PCI Adapter Placement Reference SA10-5166 Spanish
<---CAN, AP, LA, EMEA
Note: Only the Ship Pack publications appear in the Sales Manual. A complete
list of publications is provided in the PUBS section of HONE.
- DISK
- (#9395) - 2.1GB SCSI-2 Fast/Wide Disk Drive Specify
- LANGUAGES
- (#9300) - Language Group Specify - US English
CAN, LA, EMEA--->
- (#9700) - Language Group Specify - Dutch
- (#9701) - Language Group Specify - Danish
- (#9702) - Language Group Specify - Finnish
- (#9703) - Language Group Specify - French
- (#9704) - Language Group Specify - German
- (#9705) - Language Group Specify - Polish
- (#9706) - Language Group Specify - Norwegian
- (#9707) - Language Group Specify - Portuguese
- (#9708) - Language Group Specify - Spanish
- (#9709) - Language Group Specify - Swedish
- (#9710) - Language Group Specify - United Kingdom
- (#9711) - Language Group Specify - Italian
<---CAN, LA, EMEA US, CAN, LA--->
- (#9712) - Language Group Specify - Canadian French
<---US, CAN, LA CAN, LA, EMEA--->
- (#9713) - Language Group Specify - French/Belgian
<---CAN, LA, EMEA CAN, AP, LA--->
- (#9714) - Language Group Specify - Japanese
- (#9715) - Language Group Specify - Taiwan
- (#9716) - Language Group Specify - Korean
<---CAN, AP, LA
- (#9719) - Language Group Specify - Hungarian
- MEMORY
- (#9053) - Base 512KB Synchronous L2 Cache
- (#9073) - Base 64MB EDO DRAM DIMM Memory
- (#9074) - Base 32MB EDO DRAM DIMM Memory
- (#9075) - Base 64MB EDO DRAM DIMM Memory
- LINECORDS
- (#9800) - Power Cord Specify - United States/Canada
CAN, AP, LA, EMEA--->
- (#9820) - Power Cord Specify - Belgium, Finland, France (250V, 16A)
<---CAN, AP, LA, EMEA CAN, LA, EMEA--->
- (#9821) - Power Cord Specify - Denmark (250V, 10A)
<---CAN, LA, EMEA CAN, AP, LA, EMEA--->
- (#9825) - Power Cord Specify - United Kingdom (250V, 13A)
<---CAN, AP, LA, EMEA CAN, LA, EMEA--->
- (#9827) - Power Cord Specify - Israel (250V, 6-16A)
- (#9828) - Power Cord Specify - Switzerland (250V, 10A)
<---CAN, LA, EMEA CAN, AP, LA, EMEA--->
- (#9829) - Power Cord Specify - South Africa/Pakistan (250V, 16A)
<---CAN, AP, LA, EMEA CAN, LA, EMEA--->
- (#9830) - Power Cord Specify - Italy (250V, 10A and 16A)
<---CAN, LA, EMEA CAN, AP, LA--->
- (#9831) - Power Cord Specify - Argentina (250V, 10A)
- (#9833) - Power Cord Specify - Thailand (250V, 15A)
<---CAN, AP, LA CAN, LA--->
- (#9834) - Power Cord Specify - Uruguay (250V, 10A)
<---CAN, LA
- PROCESSORS
- (#9294) - Base PowerPC 604e 166MHZ Pluggable Processor
- SPECIFY CODES
- (#9004) - Southern Hemisphere Specify for Monitors
US, CAN--->
- OEM SERVICE
- (#0986) - CCS Customer Service Specify (US)
<---US, CAN
CAN, AP, LA, EMEA--->
COLOR: A specify code is not required.
VOLTAGE: A specify code is not required. Voltage/power will be determined by the plant
based on the country code of the order.
LANGUAGE: A specify code is not required. Language will be determined by the plant
based on the country code of the order.
<---CAN, AP, LA, EMEA
The following is a description of all specify feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state the interaction of
requirements among features.
Minimums and maximums are the absolute limits for a single feature without regard to
interaction with other features. The maximum valid quantity for MES orders may be
different than for initial orders. The maximums listed below refer to the largest quantity
of these two possibilities.
The order type defines if a feature is orderable only on initial orders, only on MES
orders, on both initial and MES orders, or if a feature is supported on a model due to a
model conversion. Supported features cannot be ordered on the converted model, only left
on or removed from the converted model.
US--->
This feature code routes the system order to the appropriate consolidation center.
Systems without this feature code are direct delivery to the customer.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
<---US
US, CAN--->
This feature code specifies that the system will receive special request services from
the Center for Customized Solutions (CCS).
FC 0986 is available only on the initial plant order.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported: I
<---US, CAN
Specifies that southern hemisphere models are required for all monitors on the initial
plant order or on MES orders.
- Attributes provided: None
- Attributes required: Monitor
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported: I
(For IBM US, No Longer Available as of April 15, 1997)
This feature provides a 512KB synchronous L2 cache memory as the standard L2 cache.
- Attributes provided: 512KB L2 cache memory
- Attributes required: L2 socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: I
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
(For IBM US, No Longer Available as of January 8, 1998)
This feature provides two 32MB DIMMs (EDO DRAM, 60 ns) for a total of 64MB as the
standard system memory.
- Attributes provided: 64MB system memory
- Attributes required: 2 memory slots
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
This feature provides 32MB of system memory (EDO DRAM, 60ns) in a Dual-In-Line memory
module (DIMM) package as the standard system memory.
- Attributes provided: 32MB system memory
- Attributes required: 1 memory slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: I
This feature provides one 64MB DIMM (EDO DRAM, 60 ns) as the standard system memory.
- Attributes provided: 64MB system memory
- Attributes required: 1 memory slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: Not applicable
- Initial Order/MES/Both/Supported: Initial
(For IBM US, No Longer Available as of January 8, 1998)
This feature provides the PowerPC 604e 166MHz processor as the standard microprocessor.
- Attributes provided: CPU
- Attributes required: PGA socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: I
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
English language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported: Initial
The 2.1GB Ultra-SCSI 16-bit Disk Drive Specify is a high-performance disk drive that
provides 2.1GB capacity that supports the Ultra SCSI interface speed of 40MB/s.
Note: Requires Ultra-SCSI adapter #6206 and Ultra-SCSI cable #2445 to operate at
40MB/s.
- Form Factor ...................... 3.5-inches high
- Cable included ................... No
- External Interface ............... Ultra SCSI (16-bit, Single-Ended)
- Attachment Industry Spec ......... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- SCSI bus interface Speed ......... 40MB/s (max)
- Average Seek Time .................8.5 ms
- Average Latency .................. 5.6ms
- Rotational Speed ................. 5400 RPM
- Maximum Media Data Transfer Rate . 8.9 MB/sec
Note: *Average seek times and maximum data transfer rate are equal to or better
than noted.
Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX
Version 4.2 or later.
- Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR
#IX61149 for disks and diagnostics.
- Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 2.1GB of disk storage
- Attributes required: 1 half-high disk bay and 1 SCSI internal, single-ended, 16-bit
address.
- For 7043-140:
- Minimum required: 1
- Maximum allowed: __1 (Initial order maximum: __1)
- OS level required: AIX 4.1.4 or later, AIX 4.2 or later
- Initial Order/MES/Both/Supported: Initial Order
CAN, LA, EMEA--->
Dutch language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported: Initial
Danish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Finnish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
German language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Polish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- 7043-140
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Norwegian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Portuguese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Spanish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Swedish language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Italian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
<---CAN, LA, EMEA
US, CAN, LA--->
Canadian French language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
<---US, CAN, LA
CAN, LA, EMEA--->
French/Belgian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
<---CAN, LA, EMEA
CAN, AP, LA--->
Japanese language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Taiwan language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
Korean language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
<---CAN, AP, LA
Hungarian language group for Nomenclature and Standard Publications.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
The following countries use the #9800 power cord to power the system unit and/or
peripheral features requiring a power cord.
- DOM U.S.
- 649 CANADA
- 832 SAUDI ARABIA
- 619 BAHAMAS
- 621 BARBADOS
- 627 BERMUDA
- 629 BOLIVIA
- 631 BRAZIL
- 661 COLOMBIA
- 663 COSTA RICA
- 681 DOMINICAN REPUBLIC
- 683 ECUADOR
- 829 EL SALVADOR
- 731 GUATEMALA
- 640 GUYANA
- 735 HONDURAS
- 759 JAMAICA
- 781 MEXICO
- 791 NETHERLANDS ANTILLES
- 811 PANAMA
- 843 SURINAM
- 859 TRINIDAD
- 871 VENEZUELA
- 760 JAPAN
- 761 JAPAN (PDS)
- 766 KOREA
- 818 PHILIPPINES
- 858 TAIWAN
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
CAN, AP, LA, EMEA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported:
<---CAN, AP, LA, EMEA
CAN, LA, EMEA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported:
<---CAN, LA, EMEA
CAN, AP, LA, EMEA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
<---CAN, AP, LA, EMEA
CAN, LA, EMEA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
<---CAN, LA, EMEA
CAN, AP, LA, EMEA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
<---CAN, AP, LA, EMEA
CAN, LA, EMEA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
<---CAN, LA, EMEA
CAN, AP, LA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
<---CAN, AP, LA
CAN, LA--->
- Attributes provided: 6 ft. power cord
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported:
<---CAN, LA
- DISK
- (#2905) - 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive Select
- (#2907) - 4.5GB Ultra-SCSI 16-bit Disk Drive Select
- (#2917) - 9.1GB Ultra-SCSI 16-Bit Disk Drive Select
- (#3007) - 4.5GB SCSI-2 F/W 1-inch (25mm) High Disk Drive Select
- (#3017) - 9.1GB SCSI-2 F/W Disk Drive Select
- (#3098) - 2.1GB to 4.5GB SCSI-2 Fast/Wide Disk Drive Select
- MEMORY
- (#4042) - 0.5MB to 1MB L2 Cache Select
- (#4101) - 64MB EDO DRAM DIMM Memory Select
- (#4102) - 128MB EDO DRAM DIMM Memory Select
- (#9080) - Base 64MB EDO DRAM DIMM Memory
- PROCESSORS
- (#4310) - PowerPC 604e 200MHz Pluggable Processor Select
- (#4315) - PowerPC 604e 233MHz Pluggable Processor Select
- (#4346) - PowerPC 604e 332MHz Pluggable Processor Select
- ADAPTERS
- (#2638) - Ultimedia Video Capture Adapter - PCI
- (#2701) - 4-Port Multiprotocol Communications Controller, ISA bus
- (#2708) - Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter for PowerPC Systems
- (#2741) - SysKonnect SK-NET FDDI-LP SAS PCI for PowerPC Systems
- (#2742) - SysKonnect SK-NET FDDI-LP DAS PCI for PowerPC Systems
- (#2743) - SysKonnect SK-NET FDDI-UP SAS PCI for PowerPC Systems
- (#2837) - MVP POWER Multi-Monitor Adapter
- (#2838) - Power GXT120P Graphics Adapter - PCI
- (#2839) - POWER GXT110P Graphics Adapter - PCI
- (#2851) - POWER GXT250P Graphics Adapter - PCI
- (#2852) - POWER GXT255P Graphics Adapter - PCI
- (#2853) - POWER GXT800P Graphics Adapter - PCI
- (#2854) - POWER GXT500P Graphics Adapter - PCI
- (#2855) - POWER GXT550P Graphics Adapter - PCI
- (#2856) - IBM 7250 Attachment Adapter - PCI
- (#2859) - POWER GXT800P with Texture Graphics Adapter - PCI
- (#2931) - 8 Port Asynchronous Adapter - EIA-232, ISA Bus
- (#2932) - 8-Port Asynchronous Adapter EIA-232/422A, ISA Bus
- (#2933) - 128 Port Asynchronous Controller, ISA Bus
- (#2920) - IBM PCI Token-Ring Adapter
- (#2947) - IBM ARTIC960Hx 4-Port Selectable PCI Adapter
- (#2948) - IBM ARTIC960Hx 4-Port T1/E1 PCI Adapter
- (#2961) - X.25 Interface Co-processor Adapter, ISA Bus
- (#2979) - PCI Auto LANstreamer Token Ring Adapter
- (#2985) - PCI Ethernet BNC/RJ-45 Adapter
- (#2986) - 3Com 10/100 Mbps PCI Fast EtherLink XL for PowerPC Systems
- (#2987) - PCI Ethernet AUI/RJ-45 Adapter
- (#2988) - TURBOWAYS 155 PCI MMF ATM Adapter
- (#2962) - 2-Port Multiprotocol PCI Adapter
- (#2963) - TURBOWAYS 155 PCI UTP ATM Adapter
- (#2968) - IBM 10/100 Mbps Ethernet PCI Adapter
- (#2998) - TURBOWAYS 25 ATM PCI Adapter
- (#6206) - PCI Single-Ended Ultra SCSI Adapter
- (#6207) - PCI Differential Ultra SCSI Adapter
- (#6208) - PCI SCSI-2 Fast/Wide Single-ended Adapter
- (#6209) - PCI SCSI-2 Fast/Wide Differential Adapter
- (#6215) - PCI SSA Multi-Initiator/RAID EL Adapter
- (#6218) - IBM PCI SSA 4-port RAID Adapter
- (#6222) - SSA Fast-Write Cache Option Card
- (#6309) - Digital Trunk Quad PCI Adapter
- CABLES
- (#2709) - IBM ARTIC960Hx 4-Port T1 RJ45 Cable
- (#2710) - IBM ARTIC960Hx 4-Port E1 RJ45 Cable
- (#2861) - IBM ARTIC960Hx 4-Port EIA-232 Cable
- (#2862) - IBM ARTIC960Hx 4-Port RS-449 Cable
- (#2863) - IBM ARTIC960Hx 4-Port X.21 Cable
- (#2864) - IBM ARTIC960Hx 4-Port X.35(DTE) Cable
- (#2865) - IBM ARTIC960Hx 4-Port EIA-530 Cable
- (#2934) - Asynchronous Terminal/Printer Cable EIA-232
- (#2936) - Asynchronous Cable EIA-232/V.24
- (#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus
- (#2944) - 128-Port Asynchronous Controller, PCI bus
- (#2945) - Asynchronous Terminal Cable - EIA-422A
- (#2951) - 2-Port Cable, V.24 / EIA-232
- (#2952) - 2-Port Cable, V.35
- (#2953) - 2-Port Cable, V.36 / EIA-449
- (#2954) - 2-Port Cable, X.21
- (#3124) - Serial to Serial Port Cable for Drawer/Drawer
- (#3125) - Serial to Serial Port Cable for Rack/Rack
US, CAN, AP, LA--->
- (#8130) - Remote Asynchronous Node 16-Port EIA-232 (US)
<---US, CAN, AP, LA
- (#8131) - 128-Port Asynchronous Controller Cable, 4.5 Meter
- (#8132) - 128-Port Asynchronous Controller Cable, 23cm (9-Inch)
- (#8133) - RJ-45 to DB-25 Converter Cable
AP, LA, EMEA--->
- (#8134) - Remote Asynchronous Node 16-Port EIA-232 (WT)
<---AP, LA, EMEA
- (#8135) - 64-Port to 128-Port Pin-Out Converter
- (#8136) - Rack Mountable Remote Asynchronous Node 16-Port EIA-232
- (#8137) - Enhanced Remote Asynchronous Node 16-Port EIA-232
- (#8138) - Enhanced Remote Asynchronous Node 16-Port RS-422
- (#2111) - PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable
- (#2112) - PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device Cable
- (#2113) - PCI SCSI Adapter To Single Port 8-Bit SE External Device Cable
- (#2114) - PCI SCSI Adapter 16-Bit Differential External Y Cable
- (#2115) - PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable
- (#2116) - PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable
- (#2117) - PCI SCSI Adapter 16-bit SE External Y Cable
- (#2424) - 0.6M 16-bit SCSI-2 System to System Cable
- (#2425) - 2.5M 16-bit SCSI-2 System to System Cable
- (#2445) - Internal Ultra SCSI Cable Assembly
- (#4213) - 13W3 to 15-Pin D-Shell Converter Cable
- (#4214) - 13W3 to 60/77Hz Display Cable
- (#4217) - 6091 Attachment Cable
- (#4219) - 6091-19i (77Hz-ISO), POWERdisplay 17, 19, 20 Monitor Cable
- (#4234) - 13W3 to 13W3 Display Cable
- (#4235) - 15 Pin-D Shell to 13W Display Cable
US, CAN, AP, EMEA--->
- (#4237) - 13W3 to 15-pin DDC/ID Bits Switchable Display Cable
<---US, CAN, AP, EMEA
- (#4238) - DDC 15 Pin to 13W3 Display Cable
- (#4239) - 15-D Adapter to 3BNC ID Cable
- (#4240) - DDC 13W3 to 13W3 Display Cable
- (#4241) - 13W3 to 13W3 DDC/ID Bits Switchable Display Cable
- (#4223) - Ethernet 10Base2 Transceiver
- (#2702) - Multiprotocol Attachment Cable - V.35
EMEA--->
- (#2703) - Multiprotocol Attachment Cable - V.35 (France)
<---EMEA
- (#2704) - Multiprotocol Attachment Cable - X.21
- (#2705) - 4-Port Multiprotocol Interface Cable
- (#2706) - Multiprotocol Modem Attachment Cable - EIA-232/V.24
- (#2965) - X.25 Attachment Cable X.21 - 3-Meter (10 FT.)
- (#2966) - X.25 Attachment Cable V.24 - 3-Meter (10 FT.)
- (#2967) - X.25 Attachment Cable V.35 - 3-Meter (10 FT.)
- (#2976) - X.25 Attachment Cable X.21 - 6-Meter (20 FT.)
- (#2977) - X.25 Attachment Cable V.24 - 6-Meter (20 FT.)
- (#2978) - X.25 Attachment Cable V.35 - 6-Meter (20 FT.)
- DISK
- (#2900) - 4.5GB Ultra-SCSI 16-bit Disk Drive
- (#2910) - 9.1GB Ultra-SCSI 16-bit Disk Drive
- (#3000) - 4.5GB SCSI-2 F/W 1-inch (25mm) High Disk Drive
- (#3010) - 9.1GB SCSI-2 F/W Disk Drive
- (#3034) - 4.5GB SCSI-2 F/W Disk Drive
- (#3095) - 2.1GB SCSI-2 Fast/Wide Disk Drive
- DISPLAYS
- (#3612) - P50 Color Monitor
- (#3613) - P70 Color Monitor
- (#3614) - P200 Color Monitor
US, CAN, AP, EMEA--->
- (#3615) - P201 Color Monitor
<---US, CAN, AP, EMEA AP--->
- (#3616) - IBM 9516 TFT LCD Color Monitor
<---AP
- (#3617) - G52 Color Monitor, Northern Hemisphere
- (#3618) - G52 Color Monitor, Equatorial
- (#3619) - G52 Color Monitor, Southern Hemisphere
- (#3620) - IBM P72 Color Monitor
- (#3621) - IBM P92 Color Monitor
- (#3622) - IBM P202 Color Monitor
- KEYBOARDS
- (#6600) - Quiet Touch Keyboard, US English, #103P
- (#6601) - Quiet Touch Keyboard, French, #189
- (#6602) - Quiet Touch Keyboard, Italian, #142
- (#6603) - Quiet Touch Keyboard, German/Austrian, #129
- (#6604) - Quiet Touch Keyboard, UK English, #166
- (#6605) - Quiet Touch Keyboard, Spanish, #172
- (#6606) - Quiet Touch Keyboard, Japanese, #194
- (#6607) - Quiet Touch Keyboard, Brazilian Portuguese, #275
- (#6608) - Quiet Touch Keyboard, Canadian French, #058
- (#6609) - Quiet Touch Keyboard, Belgian/UK-Flemish, #120
- (#6610) - Quiet Touch Keyboard, Belgian/French, #120
- (#6611) - Quiet Touch Keyboard, Swedish/Finnish, #153
- (#6612) - Quiet Touch Keyboard, Danish, #159
- (#6613) - Quiet Touch Keyboard, Bulgarian, #442
- (#6614) - Quiet Touch Keyboard, Swiss,French/German, #150f/g
- (#6616) - Quiet Touch Keyboard, Norwegian, #155
- (#6617) - Quiet Touch Keyboard, Dutch, #143
- (#6618) - Quiet Touch Keyboard, Portuguese, #163
- (#6619) - Quiet Touch Keyboard, Greek, #319
- (#6620) - Quiet Touch Keyboard, Hebrew, #212
- (#6621) - Quiet Touch Keyboard, Hungarian, #208
- (#6622) - Quiet Touch Keyboard, Icelandic, #197
- (#6623) - Quiet Touch Keyboard, Polish, #214
- (#6624) - Quiet Touch Keyboard, Romanian, #446
- (#6625) - Quiet Touch Keyboard, Slovakian, #245
- (#6626) - Quiet Touch Keyboard, Czech, #243
- (#6627) - Quiet Touch Keyboard, Turkish, #179
- (#6628) - Quiet Touch Keyboard, Turkish, #440
- (#6629) - Quiet Touch Keyboard, LA Spanish, #171
- (#6630) - Quiet Touch Keyboard, Arabic, #238
- (#6632) - Quiet Touch Keyboard, Serbian-Cyrillic, #118
- (#6633) - Quiet Touch Keyboard, Korean, #413
- (#6634) - Quiet Touch Keyboard, Chinese/US, #467
- (#6635) - Quiet Touch Keyboard, French Canadian, #445
- (#6636) - Quiet Touch Keyboard, Thailand, #191
- (#6638) - Quiet Touch Keyboard, Russian, #443
- (#6639) - Quiet Touch Keyboard, Croatian, #105
- (#6640) - Quiet Touch Keyboard, US English ISO9995, #103P(EMEA)
- (#6900) - Enhanced Keyboard - U.S. English (103P)
US, CAN, EMEA--->
- (#6901) - Enhanced Keyboard - French (189)
- (#6903) - Enhanced Keyboard - German/Austrian (129)
<---US, CAN, EMEA CAN, EMEA--->
- (#6902) - Enhanced Keyboard - Italian (142)
- (#6904) - Enhanced Keyboard - U.K. English (166)
<---CAN, EMEA US, CAN, LA, EMEA--->
- (#6905) - Enhanced Keyboard - Spanish (172)
<---US, CAN, LA, EMEA US, CAN, AP, EMEA--->
- (#6906) - Enhanced Keyboard - Japanese (194)
<---US, CAN, AP, EMEA CAN, LA--->
- (#6907) - Enhanced Keyboard - Brazilian/Portuguese (275)
<---CAN, LA US, CAN--->
- (#6908) - Enhanced Keyboard - Canadian French (058)
<---US, CAN CAN, EMEA--->
- (#6909) - Enhanced Keyboard - Belgian Dutch (120)
- (#6910) - Enhanced Keyboard - Belgian French (120)
- (#6911) - Enhanced Keyboard - Swedish/Finnish (153)
- (#6912) - Enhanced Keyboard - Danish (159)
- (#6913) - Enhanced Keyboard - Bulgarian (442)
- (#6914) - Enhanced Keyboard - Swiss French (150F)
- (#6915) - Enhanced Keyboard - Swiss German (150G)
- (#6916) - Enhanced Keyboard - Norwegian (155)
- (#6917) - Enhanced Keyboard - Dutch (143)
- (#6918) - Enhanced Keyboard - Portuguese (163)
- (#6919) - Enhanced Keyboard - Greek (319)
- (#6920) - Enhanced Keyboard - Hebrew (212)
- (#6921) - Enhanced Keyboard - Hungarian (208)
- (#6922) - Enhanced Keyboard - Icelandic (197)
- (#6923) - Enhanced Keyboard - Polish (214)
- (#6924) - Enhanced Keyboard - Romanian (446)
- (#6925) - Enhanced Keyboard - Slovak (245)
- (#6926) - Enhanced Keyboard - Czechoslovakian (243)
- (#6927) - Enhanced Keyboard - Turkish (179)
- (#6928) - Enhanced Keyboard - Turkish (440)
- (#6930) - Enhanced Keyboard - Arabic (253)
<---CAN, EMEA CAN, AP--->
- (#6933) - Enhanced Keyboard - Korean
- (#6935) - Enhanced Keyboard - Traditional Chinese
<---CAN, AP
- MEMORY
- (#4085) - 1MB Synchronous L2 Cache
- (#4112) - 16MB EDO DRAM DIMM Memory
- (#4113) - 32MB EDO DRAM DIMM Memory
- (#4114) - 64MB EDO DRAM DIMM Memory
- (#4115) - 128MB EDO DRAM DIMM Memory
- SCSI DEVICES
- (#2618) - 8X Speed Tray Loading CD-ROM
- (#2619) - 20X (Max) SCSI-2 CD-ROM Drive
- (#6142) - 4GB/8GB 4MM Internal Tape Drive
- (#6159) - 12/24GB 4mm Internal Tape Drive
- MISCELLANEOUS
US--->
- (#0001) - After-market Order Indicator
<---US US--->
- (#0600) - Aggregation Center Routing Indicator - Rochester
<---US US, CAN, AP, LA--->
- (#1748) Custom QuickShip Indicator
<---US, CAN, AP, LA
- (#3752) - Service Package
- (#3753) - Options Library (hard copy)
- (#6041) - 3-Button Mouse
- (#6308) - Personal Microphone
- (#6405) - Amplified Speakers (US Power Supply)
EMEA--->
- (#6406) - Amplified Speakers (UK Power Supply)
- (#6407) - Amplified Speakers (European Power Supply)
<---EMEA AP--->
- (#6408) - Amplified Speakers (AP/Australia Power Supply)
- (#6409) - Amplified Speakers (Japan Power Supply)
<---AP
- (#6509) - Media Bay Disk Drive Mounting Kit
- (#8227) - Tie-down Strap Security Device
US, AP, LA, EMEA--->
- (#5005) - Software Preinstall
<---US, AP, LA, EMEA CAN, AP--->
- (#5006) - AIX Version 4 Client Preload
- (#5008) - AIX Version 4 Server Preinstall (D5 Processor Group)
<---CAN, AP
- (#5014) - Windows NT Server Indicator (Factory Order Only)
- PROCESSORS
- (#4316) - PowerPC 604e 200MHz Pluggable Processor Upgrade
- (#4318) - PowerPC 604e 233MHz Pluggable Processor Upgrade
- (#4347) - PowerPC 604e 332MHz Pluggable Processor Upgrade
The following is a description of all special feature codes in numeric order.
Attributes, as defined in the following feature descriptions, state the interaction of
requirements among features.
Minimums and maximums are the absolute limits for a single feature without regard to
interaction with other features. The maximum valid quantity for MES orders may be
different than for initial orders. The maximums listed below refer to the largest quantity
of these two possibilities.
The order type defines if a feature is orderable only on initial orders, only on MES
orders, on both initial and MES orders, or if a feature is supported on a model due to a
model conversion. Supported features cannot be ordered on the converted model, only left
on or removed from the converted model.
US--->
This feature may be used in orders for features ordered by MES. This feature prevents
configuration checking. It does not have to be repeated for subsequent MES orders for the
same machine.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: MES
<---US
US, CAN, AP, LA--->
When specified at time of order, this feature enables delivery of your system in seven
days from time of order entry. Trials, Loaners, used equipment, RPQs, PRPQ, or Center for
Customization Services orders may not use this feature. Available only on the initial
plant order. Existing features #0002, #0986, and #0600 cannot coexist with #1748.
- Attributes provided: 7-day delivery
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: Does not apply
- Initial Order/MES/Both/Supported: Initial
<---US, CAN, AP, LA
This is an Dual Port 8-bit External SCSI-2 Cable with Terminator which is used in
conjunction with the SCSI-2 adapter to attach an external SCSI-2 device to the system
unit. This cable is approximately 1.5 meters long.
- Attributes provided: Attachment of external 2-port, 8-bit devices to the PCI SCSI-2
Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This is an Single Port 8-bit External SCSI-2 Cable with Terminator which is used in
conjunction with the SCSI-2 adapter to attach an external SCSI-2 device to the system
unit. This cable is approximately 1.5 meters long.
- Attributes provided: Attachment of external 2-port, 8-bit differential devices to the
PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
- Attributes provided: Attachment of external single-port, 8-bit SE devices to the PCI
SCSI-2 Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This is a dual port 16-bit external SCSI-2 cable with terminator which is used in
conjunction with the SCSI-2 adapter to attach an external SCSI-2 device to the system
unit. This cable is approximately one meter long.
- Attributes provided: Attachment of external 2-port 16-bit SE devices to the PCI SCSI-2
Fast/Wide adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
- Attributes provided: Attachment of external 2-port 16-bit differential devices to the
PCI SCSI-2 differential adapter
- Attributes required: 1 external SCSI-2 Fast/Wide Port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
- Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 Fast/Wide adapter
- Attributes required: 1 External SCSI-2 Port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
The 0.6m 16-bit SCSI-2 Differential System to System Cable provides for the connection
between two or more RS/6000 processors that each have a SCSI-2 Differential Fast/Wide
Adapter and a SCSI-2 Differential Fast/Wide Y-Cable (16-bit) This 68-pin cable is .6 meter
(22.7 inches) in length.
- Attributes provided: None
- Attributes required: IBM SCSI-2 Differential Fast/Wide Adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 per feature 6209
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This cable provides for the connection between two or more RS/6000 processors that each
have a SCSI-2 Differential Fast/Wide Adapter and a SCSI-2 Differential Fast/Wide Y-Cable
(16-bit) installed. This 68-pin cable is 2.5 meter (8.2 feet) in length
- Attributes provided: None
- Attributes required: IBM SCSI-2 Differential Fast/Wide Adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 per feature 6209
- OS level required: None
- Initial Order:/MES/Both/Supported: B
(From PCI Single-Ended Ultra SCSI adapter to Single-Ended Ultra SCSI devices - 3
maximum) (3-Drop, 16-Bit)
- Attributes provided: Cable assembly #2445 is an internal 16-bit Ultra SCSI cable that
provides a signal path from the Single-Ended Ultra SCSI adapter to a maximum of 3 internal
Ultra SCSI Single-Ended disk drives.
- Attributes required: PCI Single-Ended Ultra SCSI Adapter (#6206)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(For IBM US, No Longer Available as of January 8, 1998)
The 8X Speed Tray-loading CD-ROM is a SCSI-2 SE 8bit, multisession capable, 5.25-inch
half-high CD-ROM.
Characteristics:
- Media Data Transfer Rate:... 1200KB/sec
- Interface:.................. SCSI-2 8-bit SE
- Avg. Random Access Time:.... 150ms (typical)
- Buffer Memory:.............. 256KB
- Media capacity greater than 600MB
- Multisession capable
- 5.25-inch half-high form
- Operates in either vertical or horizontal position
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
- Attributes provided: 600MB 8X Speed (1200KB/sec) CD-ROM
- Attributes required: 1 half high media bay and 1 SCSI-2 internal SE 8-bit address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The 20X (Max) SCSI-2 Internal CD-ROM Drive is a tray loading CD-ROM drive providing up
to 3000KB/sec maximum media data transfer rate. It is a 5.25 inch half-high form factor,
single ended, 8 bit, multi-session capable, CD-ROM drive which provides state of the art
performance and supports existing 600MB CD-ROM discs.
Characteristics:
- Media Data Transfer Rate: 3000 KB/sec (Max)
- Interface: SCSI-2 8 bit Single Ended (SE)
- Avg. Random Access Time: 95ms (typical)
- Buffer Memory: 512KB
- Media capacity: Greater than 600MB
- Multisession capable (Reads CDR & CDRW media)
- 5.25-inch half-high form factor
- Operates in either vertical or horizontal positions
- Interface supports standard and extended XA formats
- Loading tray supports 12cm and 8cm disks
- Attributes provided: 600MB 20X (max)(up to 3000KB/sec) CDROM
- Attributes required: 1 half high media bay and 1 SCSI-2 internal SE 8-bit address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_ (Initial order maximum: _1_)
- OS level required: AIX 4.1.4 or later, AIX 4.2 or later, AIX 4.3 or later
- Initial Order/MES/Both/Supported: Both
The Ultimedia Video Capture Adapter is a PCI-based adapter that allows the capture of
live video and still images. This adapter, coupled with Ultimedia Services and the
appropriate optional hardware, can be used for entry-level video conferencing, image
capture, and video monitoring.
- Attributes provided: Video capture and monitoring
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.2.1 or AIX 4.1.5
- Initial Order/MES/Both/Supported: Both
This adapter supports attachment of RS/6000 systems to wide area networks at speeds up
to 64 kbps. The ISA-bus based adapter contains 4 ports supporting EIA-232, EIA-422A, V.35,
or X.21 physical interfaces. These physical interfaces are accomplished using the IBM
4-Port Multiprotocol Interface Cable (FC 2705 - refer to the RS/6000 System Overview for
detail on port and physical interface configurations supported).
This adapter consists of a base card and a daughter card. The two cards are physically
connected and require a single ISA bus card slot.
The product supports SDLC connections to synchronous data networks at speeds up to and
including 64 kbps per port.
Characteristics:
- ISA (Industry Standard Architecture) bus form factor.
- 80C186 at 10 MHz processor
- 1 MB RAM for data buffering
- Synchronous protocols (full duplex) support.
- EIA-232 / EIA-422A / V.35 / X.21 physical interfaces supported.
This feature requires use of the IBM 4-Port Multiprotocol Interface Cable (#2705). This
cable (actually a breakout box) supports EIA-232 on Ports 0-3, EIA422A on Ports 0 and 2,
V.35 on ports 0 and 1, or X.21 on Port 0. Additionally, cables are required to connect
modems to the breakout box and can be ordered as: FC 2706 (EIA-232), FC 2703 (V.35
France), FC 2704 (X.21) or FC 2702 (V.35).
- Attributes provided: Up to 4 ports (selectable as EIA-232, EIA-422A, V.35 or X.21) for
synchronous protocols including SDLC.
- Attributes required: 1 ISA bus slot and IBM 4-port Multiprotocol Interface Cable (#2705)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5;
- Initial Order/MES/Both/Supported: B
- Includes wrap plug
- 2 Meters (6.5 feet) in length
- Maximum of two per 4-Port Multiprotocol Interface Cable (FC 2705)
- Attributes provided: V.35 attachment capability
- Attributes required: 4-Port Multiprotocol Comm. Controller (#2701), ISA (#2705) 4-Port
Multiprotocol Interface Cable
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 per Multiprotocol Interface Cable (#2705)
- OS level required: None
- Initial Order/MES/Both/Supported: B
EMEA--->
- Includes wrap plug
- 2 Meters (6.5 feet) in length
- Maximum of two per 4-Port Multiprotocol Interface Cable (FC 2705)
- Attributes provided: V.35 attachment capability (France)
- Attributes required: FC 2701 4-Port Multiprotocol Comm. Controller, ISA FC 2705 4-Port
Multiprotocol Interface Cable
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 per Multiprotocol Interface Cable (#2705)
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---EMEA
- 3 Meters (9.8 feet) in length
- Maximum of 1 per 4-Port Multiprotocol Interface Cable (FC 2705)
- Attributes provided: X.21 attachment capability
- Attributes required: ISA (#2705) 4-Port Multiprotocol Interface Cable
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per Multiprotocol Interface Cable (#2705)
- OS level required: None
- Initial Order/MES/Both/Supported: B
The 4-Port Multiprotocol Interface cable is actually a breakout box 3 meters (9.8 ft.)
which provides selectable physical interfaces for the 4-Port Multiprotocol Communications
Controller. Users can select from: EIA232 (ports 0-3), EIA422A (ports 0 and 2), V.35
(ports 0 and 1), or X.21 (port 0). It supports the following attachment cables: 2702, 2703
(France), 2704, and 2706 to the desired network.
- 3 Meters (9.8 feet) in length
- Maximum of one per 4-Port Multiprotocol Communications Controller
- Includes wrap plug
- Attributes provided: EIA232, EIA422A, V.35, and X.21 interfaces
- Attributes required: One 4-Port Multiprotocol Communications Controller
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per 4-Port Multiprotocol Communication Controller
- OS level required: None
- Initial Order/MES/Both/Supported: B
- Includes wrap plug
- 3 Meters (9.8 feet) in length
- Maximum of four per 4-Port Multiprotocol Communications Controller
- Attributes provided: None
- Attributes required: 4-Port Multiprotocol Adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 per Multiprotocol Interface Cable (#2705)
- OS level required: None
- Initial Order/MES/Both/Supported: B
Connects PCI RS/6000 systems to worldwide ISDN networks. The adapter comes from Eicon
Technology, the world leader in ISDN technology, as a fully supported IBM feature. Eicon
ISDN DIVA PRO 2.0 PCI S/T Adapter for PowerPC Systems provides basic rate 2B + D with 64
Kbps on each B channel. TCP/IP applications are supported.
Note: AIX drivers are shipped on diskette with the hardware feature. Systems
ordered with AIX preinstalled will have the device drivers installed on the hard disk
drive.
Country approvals for ISDN network attachment:
Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
Italy, Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom, United
States.
Provides S/T interface, requires connection to NT-1 (Network Terminator-1) from the
phone line provider.
- Attributes provided: One ISDN BRI connection
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: None
- Maximum allowed: _1_ (Initial order maximum: _1_)
- OS level required: AIX 4.1.5 or AIX 4.2.1
- Initial Order/MES/Both/Supported: Both
4-Port T1 RJ45 Cable for F/C 2948.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2709)
- Minimum required: 0
- Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
4-Port E1 RJ45 Cable for F/C 2948.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2710)
- Minimum required: 0
- Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- Fiber optical FDDI Single Attach Station
This adapter provides single attachment to a FDDI concentrator (or point-to-point)
using fiber optic cabling (not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus utilization and occupies a
single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with an FDDI SC (low
cost fiber) connector
Note: This adapter is supported on all PCI-capable RS/6000 systems but does not
support remote boot over the FDDI network at this time.
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: A configuration using more than one SysKonnect FDDI adapter (feature 2741,
2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI),
constitutes a Class A system.
- Attributes provided: One Single Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
- Fiber optical FDDI Dual Attach Station
This adapter provides either dual attachment to the main ring path or dual homing to
one or two FDDI concentrators using fiber optic cabling (not supplied with the adapter).
It also offers high speed, low latency, and low CPU and bus utilization and occupies a
single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
Connection requirements:
- Connect to fiber FDDI concentrator ports using fiber optic cable with an FDDI SC (low
cost fiber) connector
Note: This adapter is supported on all PCI-capable RS/6000 systems but does not
support remote boot over the FDDI network at this time.
Note: AIX Device Driver diskette is shipped with the adapter.
Limitation: A configuration using more than one SysKonnect FDDI adapter (feature 2741,
2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI),
constitutes a Class A system.
- Attributes provided: One Dual Attach Station Fiber FDDI port
- Attributes required: One PCI Slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
- Copper FDDI Single Attach Station
This adapter provides single attachment to a FDDI concentrator (or point-to-point)
using Category-5 unshielded twisted pair (UTP) cabling (not supplied with the adapter).
Note: This adapter is supported on all PCI-capable RS/6000 systems but does not
support remote boot over the FDDI network at this time.
Note: AIX Device Driver diskette is shipped with the adapter.
It also offers high speed, low latency, and low CPU and bus utilization and occupies a
single PCI bus slot.
Features:
- Occupy single PCI bus slot
- Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
- SMT 7.3 compliance
- AMD SUPERNET3 single chip FDDI design
- SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
- Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
- 128KB static RAM on board
- Support under AIX SMIT and diagnostic routines
Connection requirements:
- Connect to Category-5 unshielded twisted pair FDDI concentrator ports using shielded
RJ45 connector
Limitation: A configuration using more than one SysKonnect FDDI adapter (feature 2741,
2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI),
constitutes a Class A system.
- Attributes provided: One Single Attach Station CDDI (copper) port
- Attributes required: One PCI Slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The MVP POWER Multi-Monitor Adapter is a multi-monitor, multi-function adapter that
provides a unique technology of allowing multiple monitors to be attached to a single
controller and provides seamless mouse operations from one display to the next. The MVP is
a single PCI-based graphics adapter card that has dual ports.
The MVP POWER Mulit-Monitor Adapter, when used in a PowerPC platform with two P200-N2
monitors, meets the requirements of ISO 9241 Parts 3 and 8.
- Attributes provided: Graphics Capability
- Attributes required: PCI Slot
- For 7043-140:
The POWER GXT120P provides video acceleration features such as scaling and color space
conversion. The GXT120P can support multisync monitors with at least a 64KHz horizontal
scan capability or DDC-2B-compliant multisync monitors with at least a 38KHz horizontal
scan capability.
Ultimedia Services 2.2.0 and Xlib APIs are supported on AIX Version 4.2.1 or 4.3.
- Attributes provided: Graphics adapter
- Attributes required: 1 PCI slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: AIX Version 4.2.1, or 4.3
- Initial Order/MES/Both/Supported: Both
(For IBM US, No Longer Available as of May 15, 1998)
The IBM POWER GXT110P Graphics Adapter is an 8-bit, 256-color adapter that attaches via
one 32-bit PCI slot. It is designed as an entry-level 2D graphics adapter.
Characteristics of the POWER GXT110P are:
- 32-bit PCI bus interface
- 2MB DRAM
- Pattern fill support
- Rectangular and non-rectangular clipping
- 256 colors from a palette of 256,000 colors
- 1 color map
- Multisync monitor resolution support 640x480, 800x600, 1024 x 768, 1280 x 1024
- 60 to 85 Hz Monitor refresh rates
- Attributes provided: Graphics Capability
- Attributes required: PCI Slot (short)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (AIX) (Initial order maximum: 2)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The IBM POWER GXT250P Graphics Adapter is an 8-bit, single buffer adapter (8-bit double
buffer for 1024x768) that attaches to the standard PCI bus interface. It is designed for
2D applications including: desktop publishing, X-window applications, 2D mechanical
drafting, CASE, chemical and biological applications, and electrical CAD.
Characteristics of the POWER GXT250P are:
- 64-bit or 32-bit PCI bus interface
- 3MB of VRAM
- Hardware acceleration for points, lines, triangles, rectangles, quadrilaterals, bit
block transfer
- Pattern fill support
- Rectangular and non-rectangular clipping
- Up to 256 colors from a palette of 16.7 million
- Hardware window support (4 Window ID Bits)
- Dithering
- Three hardware color maps
- Monitor resolution support
- AIX 4.1.5: 1024 x 768, 1280 x 1024
- 60 to 85 Hz Monitor refresh rates
- Capable of driving monitors that meet ISO 9241 Part 3 Specification
- Attributes provided: Graphics Capability
- Attributes required: PCI Slot (short)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (AIX) (Initial order maximum: 2)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The IBM POWER GXT255P Graphics Adapter is an 8, 16, or 24-bit, single-buffer adapter
(8-bit double-buffer up to 1280x1024) that attaches to the standard PCI bus interface. It
is designed for 2D applications including: desktop publishing, X-window applications, 2D
mechanical drafting, CASE, chemical and biological applications, and electrical CAD.
Characteristics of the POWER GXT255P are:
- 64-bit or 32-bit PCI bus interface
- 8MB of VRAM
- Hardware acceleration for points, lines, triangles, rectangles, quadrilaterals, bit
block transfer
- Pattern fill support
- Rectangular and Non-rectangular clipping
- Up to 16.7 million colors from a palette of 16.7 million
- Hardware window support (4 Window ID Bits)
- Dithering
- Three hardware color maps
- Monitor resolution support
- AIX 4.1.5: 1024 x 768, 1280 x 1024
- 60 to 85Hz Monitor refresh rates
- Capable of driving monitors that meet ISO 9241 Part 3 Specification
- Attributes provided: Graphics Capability
- Attributes required: PCI Slot (short)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (AIX) (Initial order maximum: 2)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The POWER GXT800P Graphics Adapter is a single PCI adapter card requiring 3 slots to
attach to RS/6000 models. It supports a display resolution of 1280 x 1024 including
monitors that comply with the ISO 9241 Part 3 standard, and allows up to 16.7 million
simultaneous colors. For the OpenGL, GL 3.2, graPHIGS, and PEX APIs, the GXT800P offers
support for 8-bit and 24-bit double-buffered color.
The GXT800P provides hardware acceleration for advanced 3D graphics functions including
hidden-line and surface removal, antialiasing, Gouraud shading, depth cueing, stenciling
and transparency. The GXT800P has an optional feature (#2859) for hardware texture support
improving texture performance for the GXT800P. Stereo viewing is also supported.
- Characteristics of the IBM POWER GXT800P Graphics Adapter are:
- 1280x1024 resolution
- ISO support 77 Hz Video Refresh
- 8/24-bit Double Buffer
- 24-bit Z Buffer
- 8-bit Overlay Buffer
- 8-bit Window ID Buffer
- 8-bit Utility/Stencil Buffer
- 8-bit Alpha Double Buffer
- Hardware Texture Option
- Attributes provided: Graphics capability
- Attributes required: 1 PCI slot, 2 other slots (see limitations)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5
- Initial Order/MES/Both/Supported: B
(For IBM US, No Longer Available as of January 30, 1998)
The IBM POWER GXT500P Graphics Adapter is a single PCI adapter card. It supports
display resolutions of 1280 x 1024 and 1024 x 768 including monitors that comply with the
ISO 9241 Part 3 standard, and allows up to 16.7 million simultaneous colors. For the
OpenGL, GL 3.2, graPHIGS and PEX APIs, the GXT500P offers support for 8-bit and 12-bit
double-buffered color. The GXT500P also supports single-buffer 24-bit true color.
The GXT500P provides hardware acceleration for advanced 3D graphics functions including
hidden-line and surface removal, antialiasing, Gouraud shading, depth cueing, stenciling
and transparency. Stereo viewing is also supported on the GXT500P.
- Characteristics of the IBM POWER GXT500P Graphics Adapter are:
- 1280x1024 resolution
- ISO support 77 Hz Video Refresh
- 8/12-bit Double Buffer or one 24-bit Single Buffer
- 24-bit Z Buffer
- 8-bit Overlay Buffer
- 8-bit Window ID Buffer
- 8-bit Utility/Stencil Buffer
- 8-bit Alpha Buffer
- Attributes provided: Graphics capability
- Attributes required: 1 PCI slot (long)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5;
- Initial Order/MES/Both/Supported: B
The POWER GXT550P Graphics Adapter is a single PCI adapter card. It supports display
resolutions of 1280 x 1024 and 1024 x 768 including monitors that comply with the ISO 9241
Part 3 standard, and allows up to 16.7 million simultaneous colors. For the OpenGL, GL
3.2, graPHIGS and PEX APIs, the GXT550P offers support for 8-bit and 24-bit
double-buffered color. For the OpenGL and GL 3.2, the GXT550P also supports 12-bit
double-buffered color.
The GXT550P provides hardware acceleration for advanced 3D graphics functions including
hidden-line and surface removal, antialiasing, Gouraud shading, depth cueing, stenciling
and transparency. Stereo viewing is also supported on the GXT550P.
- Characteristics of the IBM POWER GXT550P Graphics Adapter are:
- 1280x1024 resolution
- ISO support 77 Hz Video Refresh
- 8/12/24-bit Double Buffer
- 24-bit Z Buffer
- 8-bit Overlay Buffer
- 8-bit Window ID Buffer
- 8-bit Utility/Stencil Buffer
- 8-bit Alpha Double Buffer
- Attributes provided: Graphics capability
- Attributes required: 1 PCI slot (long)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5;
- Initial Order/MES/Both/Supported: B
(For IBM US, No Longer Available as of July 24, 1998)
This feature is the adapter interface to the internal or external POWER GXT1000
Graphics Accelerator.
- Attributes provided: Attachment to an internal or external GXT1000
- Attributes required: 1 PCI slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5;
- Initial Order:/MES/Both/Supported: B
The POWER GXT800P with Texture Graphics Adapter is a single PCI adapter card requiring
3 slots to attach to RS/6000 models.
It supports a display resolution of 1280 x 1024 including monitors that comply with the
ISO 9241 Part 3 standard, and allows up to 16.7 million simultaneous colors. For the
OpenGL, GL 3.2, graPHIGS, and PEX APIs, the GXT800P offers support for 8-bit and 24-bit
double-buffered color.
- Attributes provided: Graphics capability
- Attributes required: 1 PCI slot, 2 other slots (see limitations)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5
- Initial Order/MES/Both/Supported: B
4-Port EIA-232 Cable for F/C 2947.
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
4-Port RS-449 Cable for F/C 2947.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2862)
- Minimum required: 0
- Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
4-Port X.21 Cable for F/C 2947.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2863)
- Minimum required: 0
- Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
4-Port X.35(DTE) Cable for F/C 2947.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2864)
- Minimum required: 0
- Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
4-Port EIA-530 Cable for F/C 2947.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2865)
- Minimum required: 0
- Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
The 4.5GB Ultra-SCSI 16-bit Disk Drive is a high-performance disk drive that provides
4.5GB capacity that supports the Ultra SCSI interface speed of 40MB/s.
Note: Requires Ultra-SCSI adapter #6206 and Ultra-SCSI cable #2445 to operate at
40MB/s.
- Form Factor ........... 1-inch(25mm) high by 4.0-inch (102mm) wide
- Cable included ................... No
- External Interface ............... Ultra SCSI (16-bit, Single-Ended)
- Attachment Industry Spec ......... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- SCSI bus interface Speed ......... 40MB/s (max)
- Average Seek Time .................7.9 ms
- Average Latency .................. 4.17ms
- Rotational Speed ................. 7200 RPM
- Maximum Media Data Transfer Rate . 13.7 MB/sec
Note: *Average seek times and maximum data transfer rate are equal to or better
than noted.
Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX
Version 4.2 or later.
- Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR
#IX61149 for disks and diagnostics.
- Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 half-high disk bay and 1 SCSI internal, single-ended, 16-bit
address.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _3_ (Initial order maximum: _2_)
- OS level required: AIX 4.1.5 or later, AIX 4.2 or later
- Initial Order/MES/Both/Supported: Both
This feature may be selected in place of the standard disk drive on the initial system
order. Refer to feature (#2908) characteristics.
- Machines ordered with AIX Version 4.1.3, 4.1.4, and 4.1.5 require the additional APAR
IX61149, IX62529, and IX62576 for disks and diagnostics.
- Machines ordered with AIX Version 4.2.0 require the addition of APAR IX60676, IX62155,
and IX62156.
Note: These APARs can be obtained through FixDist or from the IBM Support
Center. For information on FixDist, refer to the following URL on the World Wide Web:
- http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit
address.
- For 7043-140:
The 4.5GB Ultra-SCSI 16-bit Disk Drive is a high-performance disk drive that provides
4.5GB capacity that supports the Ultra SCSI interface speed of 40MB/s.
Note: Requires Ultra-SCSI adapter #6206 and Ultra-SCSI cable #2445 to operate at
40MB/s. This feature may be selected in place of the standard disk drive. See feature
#2901 for additional information.
Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX
Version 4.2 or later.
- Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR
#IX61149 for disks and diagnostics.
- Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 half-high disk bay and 1 internal SE 16-bit address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_ (Initial order maximum: _1_)
- OS level required: AIX 4.1.5 or later, AIX 4.2 or later
- Initial Order/MES/Both/Supported: Initial
The 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive offers high-performance that
provides 9.1GB of storage capacity and supports the industry Ultra-SCSI interface speed of
40MBps.
Note: Requires Ultra-SCSI adapter (#6206) to operate at 40 MBps.
Characteristics:
- Form Factor: ........................ 1-inch (25mm)high by 4.0-inch (102mm) wide
- Cable included: ..................... No
- External Interface: ................. Ultra-SCSI (16-bit, Single Ended)
- Attachment Industry Spec: ........... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- Average Seek Time: .................. 6.7 ms
- Average Latency ..................... 4.17 ms
- Rotational Speed .................... 7200 RPM
- Maximum Media Data Transfer Rate .... 22.4MBps
- Machines ordered with AIX Version 4.1.3, 4.1.4, and 4.1.5 require the additional APAR
IX61149, IX62529, and IX62576 for disks and diagnostics.
- Machines ordered with AIX Version 4.2.0 require the addition of APAR IX60676, IX62155,
and IX62156.
Note: These APARs can be obtained through FixDist or from the IBM Support
Center. For information on Fix Dist, refer to the following URL on the World Wide Web:
http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 9.1GB of disk storage.
- Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit
address.
- For 7043-140: (#2908)
(For IBM US, No Longer Available as of July 24, 1998)
The 9.1GB Ultra-SCSI 16-bit Disk Drive is a high-performance disk drive that provides
9.1GB capacity that supports the Ultra SCSI interface speed of 40MB/s.
Note: Requires Ultra-SCSI adapter #6206 and Ultra-SCSI cable #2445 to operate at
40MB/s.
- Form Factor ........... 1.6-inch(43mm) high by 4.0-inch (102mm) wide
- Cable included ................... No
- External Interface ............... Ultra SCSI (16-bit, Single-Ended)
- Attachment Industry Spec ......... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- SCSI bus interface Speed ......... 40MB/s (max)
- Average Seek Time ................ 8.9ms
- Average Latency................... 4.17ms
- Rotational Speed.................. 7200 RPM
- Maximum Media Data Transfer Rate . 13.7 MB/sec
Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX
Version 4.2 or later.
- Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR
#IX61149 for disks and diagnostics.
- Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
(For IBM US, No Longer Available as of July 24, 1998)
The 9.1GB SCSI-2 F/W Disk Drive is a high-performance disk drive that provides 9.1GB
capacity in a 1.6-inch high by 3.5-inch form factor. This compact drive provides
additional price performance and growth options for most of the RS/6000 family of systems.
Note: Requires Ultra-SCSI adapter #6206 and Ultra-SCSI cable #2445 to operate at
40MB/s. This feature may be selected in place of the standard disk device.
- Form Factor ............ 1.6 inch high by 4.0-inch wide
- Cable included ......... No
- External Interface ..... SCSI (16-bit, Single-Ended models)
- Attachment Industry Spec ANSI/SCSI-2
- SCSI interface Speed ........ 20MB
- SCSI Bus Interface Speed SCSI-2
- Average Read Seek Time *......8.9 ms
- Average Latency......... 4.17ms
- Rotational Speed........ 7200 RPM
- Maximum Media Data Transfer Rate * 13.7 MB/s
Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX
Version 4.2 or later.
- Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR
#IX61149 for disks and diagnostics.
- Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
The IBM PCI Token-Ring Adapter is a high performance, 32 bit bus master, adapter
designed to operate on selected RS/6000 models that incorporate the Peripheral Component
Interconnect (PCI) bus interface. Featuring an enhanced system interface for higher
throughput and lower system utilization, coupled with RJ-45 and DB9 connectors, this
adapter is better equipped to handle the LAN environment requirements of today's servers
and high-end workstations running I/O intensive applications on the network. Additional
features and support include:
- Operation at either 16 Mbps or 4 Mbps over unshielded twisted pair (UTP) or shielded
twisted pair (STP) via the RJ-45 and the 9-pin D-shell connectors.
- Automatic ring speed detection. To simplify installation and reduce network down time,
the adapter automatically determines the ring speed and mode of an operating network and
configures itself accordingly.
- External status light-emitting diodes (LEDs), providing visual indication of adapter and
ring status without disrupting operation.
- Full duplex LAN operation for simultaneously transmitting and receiving data.
- The system may be booted from the IBM PCI Token-Ring Adapter.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2920)
- Minimum required: 0
- Maximum allowed: _4__ (Initial order maximum: _4_)
- OS level required: AIX 4.1.5, 4.2.1, AIX 4.3.1 or later
- Initial Order/MES/Both/Supported: Both
With this adapter, up to eight EIA-232-E asynchronous serial devices (terminals,
modems, printers, etc.) may be attached. This feature contains both the adapter and 8-port
DB25 connector box providing up to eight asynchronous ports from a single I/O card slot.
The feature is designed to comply with requirements for EIA-232 and the CCITT
Recommendations V.24/V.28 Series 100 (start-stop).
Characteristics:
- ISA (Industry Standard Architecture) bus form factor.
- Data rates up to 115.2 KB (full duplex) per port.
- Fully buffered transmit and receive data.
- Single 78-pin output connector connects to the 8-port DB25 connector box.
- Full set of modem control lines for asynchronous communications
- Supports the following EIA-232 interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, and
RI
- Maximum EIA-232 distance supported is 62 meters (200 feet).
- Attributes provided: 8 EIA-232 ports
- Attributes required: 1 ISA bus slot.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order:/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
With this adapter, up to eight EIA-232 or RS422A compatible asynchronous serial devices
(terminals, modems, printers, etc.) may be attached. This feature contains both the
adapter and 8-port DB25 connector box providing up to eight asynchronous ports from a
single I/O card slot. The feature is designed to comply with requirements for EIA-232 or
422A and the CCITT recommendations V.24/V.28 Series 100 (start-stop).
Characteristics:
- ISA (Industry Standard Architecture) bus form factor
- Port programmable EIA-232 or EIA-422A capability.
- Data rates up to 115.2 KB (full duplex) per port
- Fully buffered transmit and receive data
- Single 78-pin output connector connects to the 8-port DB25 connector box
- Full set of modem control lines for asynchronous communications
- Supports the following EIA-232 interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, and
RI
- Supports the following EIA-232 interface signals when a port is configured for RS-422A
operation: DTR, DCD, and DSR.
- Maximum EIA-422A distance supported is 1200 meters (4000 feet)
- Maximum EIA-232 distance supported is 62 meters (200 feet).
- Attributes provided: Ports programmable as either EIA232 or EIA422A
- Attributes required: 1 ISA bus slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5;
- Initial Order/MES/Both/Supported: B
The 128-Port Async Adapter subsystem provides attachment for a high concentration of
asynchronous lines (up to 128) from a single ISA bus slot. Two synchronous channels link
the adapter to a maximum of eight 16-Port Remote Async Nodes (RAN), up to four RANs can be
linked to each synchronous channel. The RAN provide 16-EIA232 ports yielding a total of
128-ports supporting EIA232 devices in a maximum configuration. The RANs are FC 8130
(U.S.), FC 8134 (W.T.) or 8136 (worldwide and rack to mountable). Power supplies are
included in each RAN order.
One 4.5-meter (15-foot) cable (FC 8131 or customer-supplied cables) is available to
connect the adapter to the first Remote Async Node on each synchronous channel. Additional
Remote Async Nodes may be connected to each synchronous channel in a "daisy
chain" configuration, using either the 4.5-meter (15-foot) cable (FC 8131) or the
23-cm. (9- inch) cable (FC 8132), the shorter cable being recommended when stacking Remote
Async Nodes. Customer-supplied cables may also be substituted.
The RJ-45 to DB-25 Converter Cable (FC 8133--quantity four per order) can be used to
attach devices having a DB-25 connector to the Remote Async Nodes. One RJ-45 wrap plug and
two Controller Line Terminator plugs are included with each adapter order.
Characteristics:
- ISA (Industry Standard Architecture) bus form factor.
- Supports up to 128 ports per adapter
- Supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI
- Maximum external interface speed is 57.6 Kbps
- Maximum EIA-232 distance supported is 62 meters (200 feet).
- Attributes provided: Two 128-port Controller to first RAN connections
- Attributes required: 1 ISA bus slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5
- Initial Order/MES/Both/Supported: B
The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and
terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the
equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal
interposer) and replaces this method of printer/terminal attachment.
This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000
systems using any asynchronous ports. It is used in conjunction with:
- FC 2931 (8-port Async Adapter EIA232, ISA bus)
- FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136)
- Attributes provided: EIA232 device attachment capability
- Attributes required: Any RS/6000 Asynchronous port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
Used to attach a modem to the standard I/O ports with the 10-pin to 25-pin converter
cable (shipped with the system), 8-port Cable Assembly, 16-Port Cable Assembly, 16-Port
Asynchronous Concentrator (with RJ-45 to DB-25 Converter Cable feature FC 6402) or the
16-Port EIA-232 Remote Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The
cable is 3 meters (9.8 feet) in length.
- Attributes provided: Modem attachment to async or serial port
- Attributes required: Async or serial port
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order/MES/Both/Supported: B
For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All eight ports are
software programmable to support either EIA-232E or RS-422A protocols, at up to 230K baud.
- Attributes provided: 8 Async ports
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: None
- Maximum allowed: _5_ (Initial order maximum: _5_)
- OS level required: AIX 4.2.1, AIX 4.3
- Initial Order/MES/Both/Supported: Both
The 128-Port Async Adapter subsystem provides attachment for a high concentration of
asynchronous lines (up to 128) from a single PCI bus slot. This gives the system the
ability to serve a large number of user of EIA-232 or RS-422 devices such as terminals,
printers, and modems.
Two 2.4 Mbps synchronous channels link the adapter to a maximum of eight 16-Port Remote
Async Nodes (RANs), up to four RANs can be linked to each synchronous channel.
The new RANs being announced provide 16 EIA-232 (#8137) or 16 RS-422 (#8138) ports
yielding a total of 128-ports in a maximum configuration.
Existing RANs feature numbers 8130, 8134, or 8136 can also be used with this adapter.
If these RANs are connected the synchronous channel the data rate drops down to 1.2 Mbps.
For the best results keep the previous and new RAN's on separate synchronous channels.
- Attributes provided: Up to 128 Async Ports
- Attributes required: One PCI slot, One to eight (#8137) or (#8138)
- For 7043-140:
- Minimum required: None
- Maximum allowed: _5_ (Initial order maximum: _5_)
- OS level required: AIX 4.2.1, AIX 4.3
- Initial Order/MES/Both/Supported: Both
Provides a 20 meter (66 feet) interface cable for attaching an EIA-422A Terminal to the
8-Port and 16-Port Cable Assembly.
- Attributes provided: EIA-422A attachment capability
- Attributes required: 8-Port Asynchronous Adapter EIA232/422A (#2932)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order/MES/Both/Supported: B
The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one slot, standard
length, 32 bit PCI card. The adapter provides 4-Ports of EIA-232, EIA530, RS-449, X.21 and
V.35. Each port will support speeds up to 2.0M bps. The adapter provides hardware to
support WAN protocols such as X.25, SNA and BySync.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2947)
- Minimum required: 0
- Maximum allowed: _3__ (Initial order maximum: _3_) Adapter maximums: The combination of
feature codes (#2947), (#2948), (#2949) and (#6309) must not exceed three(3).
- OS level required: AIX 4.2.1, AIX 4.3.1 or later
- Initial Order/MES/Both/Supported: Both
The IBM ARTIC960Hx 4-Port T1/E1 PCI Adapter (#2948) is a one slot, standard length, 32
bit PCI card. The adapter provides 4-Ports of Channelized T1/E1. The adapter also provides
SCbus external TDM interface and switch.
- Attributes provided:
- Attributes required:
- For 7043-140: (#2948)
- Minimum required: 0
- Maximum allowed: _3__ (Initial order maximum: _3_) Adapter maximums: The combination of
feature codes (#2947), (#2948), (#2949) and (#6309) must not exceed three(3).
- OS level required: AIX 4.2.1, AIX 4.3.1 or later
- Initial Order/MES/Both/Supported: Both
The IBM ARTIC960Hx DSP Resource PCI Adapter (#2949) is a one slot, standard length, 32
bit PCI card. The adapter has eight DSP sites and is intended to serve as a DSP platform.
The adapter also provides SCbus external TDM interface and switch. The adapter is intended
to be used in conjunction with the DT/6000 DTQA adapter.
- Attributes provided:
- Attributes required: The IBM ARTIC960Hx DSP Resource PCI Adapter (#2949) requires that a
Digital Trunk Quad Adapter(PCI) (#6309) be installed.
- For 7043-140: (#2949)
- Minimum required: 0
- Maximum allowed: _3__ (Initial order maximum: _3_) Adapter maximums: The combination of
feature codes (#2947), (#2948), (#2949) and (#6309) must not exceed three(3).
- OS level required: AIX 4.2.1, AIX 4.3.1 or later
- Initial Order/MES/Both/Supported: Both
- For 7043-140:
- Minimum required: None
- Maximum allowed: _2 (Initial order maximum: _2 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- For 7043-140:
- Minimum required: one
- Maximum allowed: _2 (Initial order maximum: _2 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- For 7043-140:
- Minimum required: None
- Maximum allowed: _2 (Initial order maximum: _2 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- For 7043-140:
- Minimum required: None
- Maximum allowed: _2 (Initial order maximum: _2 )
- OS level required: None
- Initial Order/MES/Both/Supported: Both
The X.25 Interface Co-processor Adapter, ISA bus provides for the attachment of the
RS/6000 to synchronous data networks at speeds up to 64 KB/s. The adapter provides a
single port that will accommodate one of three selectable interfaces: EIA-232D/V.24, V.35,
or X.21. The interface is "selected" by the cable which is separately orderable
in 3m or 6m lengths.
This adapter together with IBM AIXLINK/X.25 provides a single port connection to X.25
packet switched networks. Code resident on the adapter off-loads low level X.25
communications tasks from the system processor. IBM AIXLINK/X.25 is a separately orderable
LPP.
Characteristics:
- ISA (Industry Standard Architecture) bus form factor.
- 512KB RAM for data buffering
- Synchronous protocols (full duplex) can be supported.
- V.24 interface up to 19.2 Kbps.
- V.35 interface up to 56/64 Kbps.
- X.21 (non-switched) up to 64 Kbps.
Separate cables of 3 meter (9.8 feet) or 6 meter (19.6 feet) are available for the
adapter (two lengths for each interface). A wrap plug is included with each.
Note: The DIP switches on the adapter must be set correctly to ensure proper
operation. Switch 10 should be OFF (for 16-bit interface). Also, check the guide to
operations for setting the interrupt level.
- Attributes provided: 1 synchronous port (Selectable V.24, V.35 or X.21)
- Attributes required: 1 ISA bus slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2
- OS level required: AIX 4.1.5;
- Initial Order:/MES/Both/Supported: B
This adapter provides high-speed connections between stand-alone system units on a WAN.
To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external
communications equipment including Channel Service Units (CSU), Data Service Units (DSU),
or through synchronous modems.
2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with:
- X.21 DCE - Using 2-Port Cable, X.21 (#2954)
- CCITT X.21 Signalling
- CCITT V.11 Electrical
- CCITT X.27 Electrical
- EIA-422-A Electrical
- ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable
- V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
- CCITT V.24 Signalling
- CCITT V.28 Electrical
- CCITT X.21bis Electrical and Signalling
- EIA-232-C Electrical and Signalling
- ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable
- V.35 DCE - Using 2-Port Cable, V.35 (#2952)
- CCITT V.35 Some signals for signalling
- CCITT V.28 Some signals for electrical and signalling
- ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable
- V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
- CCITT V.10 Electrical
- CCITT V.11 Electrical
- Attributes provided: Two high speed WAN connections
- Attributes required: One PCI slot. AIX Link/X25 LPP (5696-926) if X.25 is needed.
- For 7043-140:
- Minimum required: None
- Maximum allowed: _5_ (Initial order maximum: _5_) (Must be installed in slot 3, 4 or 5)
- OS level required: AIX 4.1.5, AIx 4.2.1, AIX 4.3
- Initial Order/MES/Both/Supported: Both
Provides dedicated, 155 Mbps full-duplex connection to ATM networks over either
permanent virtual circuits (PVC) or switched virtual circuits (SVC). This adapter enables
TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair (UTP). It also
supports communication with devices located on an ATM network or bridged to a token-ring,
Ethernet, or other LAN.
- Attributes provided: One ATM 155 UTP connector
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: None
- Maximum allowed: _2_ (Initial order maximum: _2_)
- OS level required: AIX 4.1.5, AIX 4.2.1, AIX 4.3
- Initial Order/MES/Both/Supported: Both
Note: The sum of #2963, 2986, 2968, 2741, 2742 and 2743 cannot exceed more than
4 per system.
(For IBM US, No Longer Available as of January 8, 1998)
See X.25 Interface Co-Processor/2 (Feature number 2960) or X.25 Interface Co-processor,
ISA bus (Feature number 2961) as appropriate.
- Attributes provided: X.21 attachment capability
- Attributes required: 1 X.25 Interface Coprocessor Adapter (FC 2960, 2961)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per (#2961)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
(For IBM US, No Longer Available as of January 8, 1998)
See X.25 Interface Co-Processor/2 (Feature number 2960) or X.25 Interface Co-processor,
ISA bus (Feature number 2961) as appropriate.
- Attributes provided: EIA232/V.24 attachment capability
- Attributes required: 1 X.25 Interface Coprocessor Adapter (FC 2960, 2961)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per (#2961)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
(For IBM US, No Longer Available as of January 8, 1998)
See X.25 Interface Co-Processor/2 (Feature number 2960) or X.25 Interface Co-processor,
ISA bus (Feature number 2961) as appropriate.
- Attributes provided: V.35 attachment capability
- Attributes required: 1 X.25 Interface Coprocessor Adapter (FC 2960, 2961)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per (#2961)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
Provides a 10 Mbps (10BaseT) or 100 Mbps (100BaseTx) full-duplex Ethernet LAN
connection. The adapter supports 32-bit bus master PCI connection to the host system for
enhanced data throughput and lower bus utilization. The adapter supports Category-5
Unshielded Twisted Pair.
- Attributes provided: One 10/100 Mbps Ethernet connector
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: None
- Maximum allowed: _4_
- OS level required: AIX 4.1.5, AIX 4.2.1, AIX 4.3
- Initial Order/MES/Both/Supported: Both
Note: The sum of #2963, 2986, 2968, 2741, 2742 and 2743 cannot exceed more than
4 per system.
Note: When ordering feature #2968 (IBM 10/100 Mbps Ethernet PCI Adapter) as part
of a factory system order and software has been preloaded, the appropriate device driver
for the feature will be shipped. New AIX customers who choose not to have the system order
preloaded with software need to select backup media. This insures that the appropriate
feature device driver will be included. Existing customers with AIX software who do not
have an AIX Update CD should place an MES software order to obtain the appropriate refresh
of AIX Update CD.
See X.25 Interface Co-Processor/2 (Feature number 2960) or X.25 Interface Co-processor,
ISA bus (Feature number 2961) as appropriate.
- Attributes provided: X.21 attachment capability
- Attributes required: 1 X.25 Interface Coprocessor Adapter (FC 2960, 2961)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per (#2961)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
See X.25 Interface Co-Processor/2 (Feature number 2960) or X.25 Interface Co-processor,
ISA bus (Feature number 2961) as appropriate.
- Attributes provided: EIA232/V.24 attachment capability
- Attributes required: 1 X.25 Interface Coprocessor Adapter (FC 2960, 2961)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per (#2961)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
See X.25 Interface Co-Processor/2 (Feature number 2960) or X.25 Interface Co-processor,
ISA bus (Feature number 2961) as appropriate.
- Attributes provided: V.35 attachment capability
- Attributes required: 1 X.25 Interface Coprocessor Adapter (FC 2960, 2961)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per (#2961)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
(For IBM US, No Longer Available as of July 24, 1998)
The Auto LANstreamer Token-Ring PCI adapter is designed to allow a RS/6000 system to
attach to 4 Mbps or 16 Mbps Token-Ring local area networks. This adapter automatically
selects the correct Token-Ring speed (4 or 16 Mbps). It is cable and network compatible
with all IBM PS/2 Token-Ring adapters; no new cables or network components are required.
The adapter has one connector, RJ-45. The RJ-45 connector is used to attach to UTP
cabling. A 10-inch conversion cable is included with the adapter to attach to STP cabling.
Characteristics:
- 4 Mbps or 16 Mbps
- Compatible with IEEE 802.5 specifications
- Peripheral Component Interconnect - PCI Bus
- 32-bit Bus Master
- No limit on the maximum number of Token Ring adapters supported - system dependent
- PCI Short - Form factor adapter
- Attributes provided: 1 Token Ring connection
- Attributes required: 1 PCI slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (AIX)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order:/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
This feature provides 10 Mbps Ethernet connectivity. It adheres to the Peripheral
Component Interconnect (PCI) Revision 2.0 and IEEE 802.3 standards. It features a
low-cost, high performance 32-bit card, 33MHz bus speed, yielding a PCI bus transfer rate
of 132 MB/s. It includes three LEDs to provide status of the card's operation and includes
auto-sense of the media connection. The controller chip on the card contains integrated
DMA buffer management for low CPU and bus utilization and look-ahead packet processing
which allows protocol analysis to begin before the end of the frame is received. This card
differs from feature 2987 because of the BNC/RJ-45 connector.
Characteristics:
- 10 Mbps Ethernet compatible with IEEE 802.3 specifications
- Peripheral Component Interconnect - PCI Bus - 132 MB/s
- 32-bit Bus Master
- Supports connections to 10Base2 via BNC connector and 10BaseT via RJ-45 connector
- PCI Short - Form factor adapter
- Attributes provided: Ethernet connectivity
- Attributes required: 1 PCI slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (AIX)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order:/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
(For IBM US, No Longer Available as of March 13, 1998)
3Com Corporation brings their Fast Ethernet adapter for PCI-bus to the RS/6000
platform. This adapter provides 10Mb/sec or 100Mb/sec connectivity to 10BaseT or 100BaseTX
Ethernet LANs, including the ability to automatically sense the speed at the hub port. In
addition, the adapter supports full duplex (FDX) operation in either 10Mb/sec or 100Mb/sec
mode.
The product allows RS/6000 customers to migrate effortlessly from 10Mb/sec LANs to
100Mb/sec LANs. See Sales Manual pages for specific operating systems levels supported.
Note: Refer to the "Limitations" section for important information.
Note: AIX Device Driver diskette is shipped with the adapter.
Features:
- Fully 802.3u Fast Ethernet standard-compatible
- Configurable transmit and receive buffering up to 8KB
- Full duplex capability
- Support under AIX SMIT and diagnostic routines
- Remote boot capability is supported on all RS/6000 models that support the PowerPC Open
Firmware standard
Connection requirements:
- Connect to 10BaseT Ethernet LANs via 10BaseT hub using Category 3, 4, or 5 UTP cabling
- Connect to 100BaseTX Ethernet LANs via 100BaseTX using Category 5 UTP cabling
- Attributes provided: One 10/100BaseTX Ethernet Port
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4
- OS level required: AIX Version 4.1.5, 4.2.1, or Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
This feature provides 10 Mbps Ethernet connectivity. It adheres to the Peripheral
Component Interconnect (PCI) Revision 2.0 and IEEE 802.3 standards. It features a
low-cost, high performance 32-bit card, 33MHz bus speed, yielding a PCI bus transfer rate
of 132 MB/s. It includes three LEDs to provide status of the card's operation and includes
auto-sense of the media connection. The controller chip on the card contains integrated
DMA buffer management for low CPU and bus utilization and look-ahead packet processing
which allows protocol analysis to begin before the end of the frame is received. This card
differs from feature 2985 because of the AUI/RJ-45 connector.
Characteristics:
- 10 Mbps Ethernet compatible with IEEE 802.3 specifications
- Peripheral Component Interconnect - PCI Bus - 132MB/sec
- 32-bit Bus Master
- Supports connections to 10BaseT networks via RJ-45 connectors and also contains a 15-pin
DIX Ethernet connector
- PCI Short - Form factor adapter
- Attributes provided: Ethernet connectivity
- Attributes required: 1 PCI slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (AIX)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order:/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
Also provides direct access to ATM networks. The TURBOWAYS 155 PCI MMF ATM Adapter
provides dedicated 155Mbps full-duplex connection using PVCs or SVCs and enables
TCP/IP to run over an ATM network. The adapter also supports communication with devices
located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.
Note: Systems ordered with AIX preinstalled will have the device drivers
installed on the hard disk drive.
TURBOWAYS 155 PCI MMF ATM Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
A maximum of four high-speed networking adapters are supported per system in any
combination. This limitation includes the following adapters:
- TURBOWAYS 155 PCI MMF ATM Adapter (#2988)
- 3Com 10/100 Mbps PCI Fast EtherLink XL for PowerPC Systems (#2986)
- SysKonnect SK-NET FDDI-LP SAS PCI for PowerPC Systems (#2741)
- SysKonnect SK-NET FDDI-LP DAS PCI for PowerPC Systems (#2742)
- SysKonnect SK-NET FDDI-UP SAS PCI for PowerPC Systems (#2743)
Note: The sum of the following adapters may be used in any combination, but must
not exceed four (4) total per system: #2741, #2742, #2743, #2986 and #2988.
- Attributes provided: One ATM 155Mbps connection
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: None
- Maximum allowed: _2_ (Initial order maximum: _2_)
- OS level required: AIX 4.1.5, AIX 4.2.1, AIX 4.3
- Initial Order/MES/Both/Supported: Both
For direct access to ATM networks, the TURBOWAYS 25 ATM PCI Adapter provides dedicated 25Mbps
full-duplex connection using PVCs or SVCs and enables TCP/IP to run over an ATM
network. The adapter also supports communication with devices located on an ATM network or
bridged to a Token-Ring, Ethernet, or other LAN.
Note: AIX drivers are shipped on diskette with the hardware feature. Systems
ordered with AIX preinstalled will have the device drivers installed on the hard disk
drive.
TURBOWAYS 25 ATM PCI Adapter is compatible with:
- IBM 8285 ATM Workgroup Switch
- IBM 8260 ATM Subsystem
- IBM 8282 ATM Concentrator
- IBM 8281 ATM LAN Bridge
- Attributes provided: One ATM 25Mbps connection
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: None
- Maximum allowed: _4_ (Initial order maximum: _4_)
- OS level required: AIX 4.1.5, AIX 4.2.1, AIX 4.3
- Initial Order/MES/Both/Supported: Both
(For IBM US, No Longer Available as of July 18, 1997)
The 4.5GB SCSI-2 Fast/Wide One-inch (25mm) High Disk Drive is a high-performance disk
drive with improved performance over previously announced 4.5GB disk drives. This drive
provides 4.5GB capacity in a new, low-profile, 1-inch (25mm) high by 4.0-inch (101.6mm)
wide form factor. It attaches via an ANSI/SCSI-2 interface.
- Form Factor ...................... 4.0-inch (101.6mm)
- Cable included ................... No
- External Interface ............... SCSI (16-bit, Single-Ended models)
- Attachment Industry Spec ......... ANSI/SCSI-2
- SCSI interface Speed ............. 20MB/s
- SCSI Bus Interface Speed ......... SCSI-2
- Average Seek Time .................7.9 ms
- Average Latency .................. 4.17ms
- Rotational Speed ................. 7200 RPM
- Maximum Media Data Transfer Rate . 13.7 MB/sec
Limitation: Machines ordered with AIX Version 4.1.4 will require the addition of
two APARs for disks and diagnostics to operate optimally -- APAR IX60675 and IX56798.
Machines ordered with AIX Version 4.2.0 will require the addition of APAR IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 half-high disk bay and 1 SCSI-2 internal single-ended 16-bit
address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 3 (Initial order maximum 2 )
- OS level required: AIX Version 4.1.5 or later, Windows NT 4.0(1) (including Windows NT
4.0 PowerPC Edition)
- Initial Order/MES/Both/Supported: Supported
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
(For IBM US, No Longer Available as of July 18, 1997)
The 4.5GB SCSI-2 Fast/Wide One-inch (25mm) High Disk Drive is a high-performance disk
drive with improved performance over previously announced 4.5GB disk drives. This drive
provides 4.5GB capacity in a new, low-profile, 1-inch (25mm) high by 4.0-inch (101.6mm)
wide form factor. It attaches via an ANSI/SCSI-2 interface. This feature may be selected
in place of the standard disk drive.
See feature #3000 for additional information.
Limitation: Machines ordered with AIX Version 4.1.4 will require the addition of
two APARs for disks and diagnostics to operate optimally -- APAR IX60675 and IX56798.
Machines ordered with AIX Version 4.2.0 will require the addition of APAR IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 half high disk bay and 1 SCSI-2 internal single-ended 16-bit
address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX Version 4.1.5 or later, Windows NT 4.0(1) (including Windows NT
4.0 PowerPC Edition)
- Initial Order/MES/Both/Supported: Supported
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
(For IBM US, No Longer Available as of July 18, 1997)
The 9.1GB SCSI-2 Fast/Wide Disk Drive is a high-performance 3.5-inch form-factor disk
drive that attaches via an ANSI/SCSI-2 interface. This compact drive provides additional
price performance and growth options for most of the RS/6000 family of systems.
- Form Factor ...................... 3.5 inch
- Cable included ................... No
- External Interface ............... SCSI (16-bit, Single-Ended models)
- Attachment Industry Spec ......... ANSI/SCSI-2
- SCSI interface Speed ............. 20MB
- SCSI Bus Interface Speed ......... SCSI-2
- Average Seek Time ................ 8.5ms
- Average Latency................... 4.17ms
- Rotational Speed.................. 7200 RPM
- Maximum Media Data Transfer Rate 13.7 MB/sec
- Attributes provided: 9.1GB of disk storage
- Attributes required: One 43mm half-high disk bay and one SCSI-2 internal single-ended
16-bit address
- For 7043-140:
- Prerequisite: One media bay disk drive mounting kit (#6509)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum 1)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: Supported
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
(For IBM US, No Longer Available as of July 18, 1997)
The 9.1GB SCSI-2 F/W Disk Drive is a high-performance disk drive that provides 9.1GB
capacity in a 1.6-inch high by 3.5-inch form factor. This compact drive provides
additional price performance and growth options for most of the RS/6000 family of systems.
This feature may be selected in place of the standard disk drive.
- Form Factor ............ 1.6 inch high by 3.5 inch wide
- Cable included ......... No
- External Interface ..... SCSI (16-bit, Single-Ended models)
- Attachment Industry Spec ANSI/SCSI-2
- SCSI interface Speed ........ 20MB
- SCSI Bus Interface Speed SCSI-2
- Average Read Seek Time ......8.5 ms
- Average Latency......... 4.17ms
- Rotational Speed........ 7200 RPM
- Maximum Media Data Transfer Rate 13.7 MB/s
- Attributes provided: 9.1GB of disk storage
- Attributes required: 1 half high disk bay and 1 SCSI-2 internal SE 16-bit address
- For 7043-140:
- Prerequisite: One media bay disk drive mounting kit (#6509)
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum 1)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: Initial Order
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
(For IBM US, No Longer Available as of July 18, 1997)
The 4.5GB SCSI-2 Fast/Wide Disk Drive is a high-performance 3.5-inch form-factor disk
drive that attaches via an ANSI-SCSI-2 interface. This compact drive provides additional
price performance and growth options for most of the RS/6000 family of systems.
- Form Factor ............ 3.5 inch
- Cable included ......... No
- External Interface ..... SCSI (16-bit, Single-Ended models)
- Attachment Industry Spec ANSI/SCSI-2
- SCSI interface Speed ........ 20MB
- SCSI Bus Interface Speed SCSI-2
- Average Seek Time .......8.5 ms
- Average Latency......... 4.17ms
- Rotational Speed........ 7200 RPM
- Maximum Media data Transfer Rate 10.2 MB/s
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 half-high disk bay and 1 SCSI-2 internal SE 16-bit address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 2)
- OS level required: AIX 4.1.5
- Initial Order:/MES/Both/Supported: Supported
The 2.1GB Ultra-SCSI 16-bit Disk Drive is a high-performance disk drive that provides
2.1GB capacity that supports the Ultra SCSI interface speed of 40MB/s.
Note: Requires Ultra-SCSI adapter #6206 and Ultra-SCSI cable #2445 to operate at
40MB/s.
- Form Factor ...................... 3.5-inches high
- Cable included ................... No
- External Interface ............... Ultra SCSI (16-bit, Single-Ended)
- Attachment Industry Spec ......... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
- SCSI bus interface Speed ......... 40MB/s (max)
- Average Seek Time .................8.5 ms
- Average Latency .................. 5.6ms
- Rotational Speed ................. 5400 RPM
- Maximum Media Data Transfer Rate . 8.9 MB/sec
Note: *Average seek times and maximum data transfer rate are equal to or better
than noted.
Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX
Version 4.2 or later.
- Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR
#IX61149 for disks and diagnostics.
- Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.
These APARs can be obtained through FixDist or from the IBM Support Center. For
information on FixDist, refer to the following URL on the worldwide web:
- http://aix.boulder.ibm.com/aix.us/fixes
- Attributes provided: 2.1GB of disk storage
- Attributes required: 1 half-high disk bay and 1 SCSI internal, single-ended, 16-bit
address.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: __3 (Initial order maximum: __2)
- OS level required: AIX 4.1.4 or later, AIX 4.2 or later
- Initial Order/MES/Both/Supported: Both
(For IBM US, No Longer Available as of July 18, 1997)
See #3034 for a description of the 4.5GB Fast/Wide SCSI-2 Disk Drive.
- Attributes provided: 4.5GB of disk storage
- Attributes required: 1 full high disk bay and 1 SCSI-2 internal SE 16-bit address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5
- Initial Order/MES/Both/Supported: Supported
This cable is available to provide a null-modem connection between the serial ports of
two CPU drawers that are mounted within the same rack.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
This cable is available to provide a null-modem connection between the serial ports of
two CPU drawers that are mounted in separate racks.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
(For IBM US, No Longer Available as of July 18, 1997)
The IBM P50 Color Monitor (featuring a Trinitron** CRT) has a maximum image size of
13.6 inches/346mm measured diagonally. This monitor is designed to support a wide range of
attachment platforms and display modes, utilizing microprocessor-controlled,
multi-frequency operation.
Characteristics:
- 0.26mm Trinitron** CRTs for bright, crisp, high definition images
- Digital user controls
- On Screen Display for ease of operation
- SWEDAC MPR-II emissions compliance
- ISO 9241-3 compliance
- Energy Star and NUTEK power management via VESA DPMS
- 15-pin D-shell connector and display cable.
- Attributes provided: Graphics capability
- Attributes required: Graphics adapter and appropriate cable
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per Graphics Adapter
- OS level required: None
- Initial Order:/MES/Both/Supported: Supported
(For IBM US, No Longer Available as of July 21, 1998)
The IBM P70 Color Monitor (featuring a Trinitron** CRT) has a maximum image size of
15.9 inches/403mm measured diagonally. This high quality premium monitor is designed to
support a wide range of attachment platforms and display modes, utilizing
microprocessor-controlled, multi-frequency operation.
Characteristics:
- 0.26mm Trinitron** CRTs for bright, crisp, high definition images
- Digital user controls
- On Screen Display for ease of operation
- SWEDAC MPR-II emissions compliance
- TCO TCO-91 emissions compliance
- ISO 9241-3 compliance
- Energy Star and NUTEK power management via VESA DPMS
- 13W3 connector
- Attributes provided: Color Display
- Attributes required: Graphics adapter and appropriate cable
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
(For IBM US, No Longer Available as of July 21, 1998)
The IBM P200 Color Monitor (featuring a Trinitron** CRT) has a maximum image size of
19.1 inches/486mm measured diagonally. This monitor is designed to support a wide range of
attachment platforms and display modes, utilizing microprocessor-controlled,
multi-frequency operation.
Characteristics:
- 0.31mm Trinitron** CRTs for bright, crisp, high definition images
- Digital user controls
- On Screen Display for ease of operation
- SWEDAC MPR-II emissions compliance
- TCO TCO-91 emissions compliance
- ISO 9241-3 compliance
- Energy Star and NUTEK power management via VESA DPMS
- 13W3 connector
- Attributes provided: Color Display
- Attributes required: Graphics adapter and appropriate cable
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
US, CAN, AP, EMEA--->
(For IBM US, No Longer Available as of July 21, 1998)
The IBM P201 Color Monitor (featuring a Trinitron** CRT) has a viewable image size of
19.1 inches (486mm). This monitor is designed to support a wide range of attachment
platforms and display modes, utilizing microprocessor-controlled, multi-frequency
operation.
Characteristics:
- 0.26mm Trinitron** CRTs for bright, crisp, high definition images
- Digital user controls
- SWEDAC MPR-II emissions compliance
- TCO-91 emissions compliance
- ISO 9241-3 capability
- Energy Star and NUTEK power management capability
- Attributes provided: Color Display
- Attributes required: Graphics adapter and appropriate cable
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
<---US, CAN, AP, EMEA
AP--->
This pearl white 16.1-inch color monitor has a viewable image size of 16.1 inches
(408mm) and provides more image viewing than a 17-inch CRT monitor. The 9516 TFT LCD Color
Monitor's compact size, thin design, and Lift/Tilt/Swivel thin-line stand take minimal
desktop space. On-screen display (OSD) combined with digital controls gives full control
over picture position, brightness and contrast, fine tuning, color tint, and power
management. Easily understood icons identify the controls and their operation. The 1280 x
1024 maximum addressability creates a clearer image on the screen and increased user
comfort. The monitor complies with ISO 9241 Part 3 (Flat Panel Addendum) for
front-of-screen ergonomics when forming part of an ISO compliant system.
- Attributes provided: Color monitor
- Attributes required: Graphics Adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
<---AP
The IBM G52 Monitor is designed and built in response to user input. The G52 has a
15-inch FST CRT size with a viewable area of 13.6" and a .28mm dot pitch. The G52
Monitor complies with ISO 9241 Part 3, the international standard covering front-of-screen
ergonomics. It has a top reduced flicker VESA mode of 1024 x 768 at 85Hz non-interlaced
with a maximum addressability of 1280 x 1024, creating a clearer image on the screen and
increased user comfort.
The G52 Northern Hemisphere monitor is used in:
- US / Can, EMEA
- AP-N (China & Japan)
- AP-S (Malaya, etc)
- Attributes provided: Color monitor
- Attributes required: Graphics Adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
The IBM G52 Monitor is designed and built in response to user input. The G52 has a
15-inch FST CRT size with a viewable area of 13.6" and a .28mm dot pitch. The G52
Monitor complies with ISO 9241 Part 3, the international standard covering front-of-screen
ergonomics. It has a top reduced flicker VESA mode of 1024 x 768 at 85Hz non-interlaced
with a maximum addressability of 1280 x 1024, creating a clearer image on the screen and
increased user comfort.
The G52 Equatorial monitor is used in:
- LA (All Latin America including Mexico)
- EMEA (South Africa)
- AP-S (Indonesia etc)
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
The IBM G52 Monitor is designed and built in response to user input. The G52 has a
15-inch FST CRT size with a viewable area of 13.6" and a .28mm dot pitch. The G52
Monitor complies with ISO 9241 Part 3, the international standard covering front-of-screen
ergonomics. It has a top reduced flicker VESA mode of 1024 x 768 at 85Hz non-interlaced
with a maximum addressability of 1280 x 1024, creating a clearer image on the screen and
increased user comfort.
The G52 Southern Hemisphere monitor is used in Australia & New Zealand only.
- Attributes provided: Color Monitor
- Attributes required: Graphics Adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
The P72 monitor has the following general characteristics:
- 17-inch Trinitron (R) CRT with a viewable image size of 16.0 inches (407 mm),
incorporating a 0.25 mm aperture grille for bright, high-definition images.
- A maximum horizontal frequency of 85 KHz provides reduced flicker operation at an
optimum 1024 x 768 pels at up to 85 Hz non-interlaced with a maximum addressability of
1280 x 1024 pels.
- Attributes provided: Graphics capability
- Attributes required: Graphics adapter and appropriate cable
- For 7043-140: (#3620)
- Minimum required: 0
- Maximum allowed: 2 depending on graphics adapter
- OS level required: Not applicable
- Initial Order/MES/Both/Supported: Both
The P92 monitor has the following general characteristics:
- 19-inch Trinitron (R) CRT with a viewable image size of 17.9 inches (456mm),
incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.
- A maximum horizontal frequency of 94 KHz provides reduced flicker operation at an
optimum 1280 x 1024 pels at up to 85 Hz non-interlaced with a maximum addressability of
1600 x 1200 pels.
- Attributes provided: Graphics capability
- Attributes required: Graphics adapter and appropriate cable
- For 7043-140: (#3621)
- Minimum required: 0
- Maximum allowed: 2 depending on graphics adapter
- OS level required: Not applicable
- Initial Order/MES/Both/Supported: Both
The P202 monitor has the following general characteristics:
- 21-inch Trinitron (R) CRT with a viewable image size of 19.8 inches (503mm),
incorporating a 0.25 - 0.27 mm aperture grill e for bright, high-definition images.
- A maximum horizontal frequency of 107 KHz provides reduced flicker operation at an
optimum 1600 x 1200 pels at up to 85 Hz non-interlaced with a maximum addressability of
1600 x 1200 pels.
- Attributes provided: Graphics capability
- Attributes required: Graphics adapter and appropriate cable
- For 7043-140: (#3622)
- Minimum required: 0
- Maximum allowed: 2 depending on graphics adapter
- OS level required: Not applicable
- Initial Order/MES/Both/Supported: Both
This kit contains service publications, wrap plugs, and diagnostic CD-ROM for 7043
machines. Service publications include "RS/6000 7043 Service Guide" (SA38-0511)
and "RS/6000 Diagnostics Information for Multiple Bus Systems (SA38-0509). The
"7043 Service Guide" provides maintenance information specific to the 7043
system unit, adapters, and attached devices that do not have their own service
information. It also includes Maintenance Analysis Procedures (MAPs) that are not common
to other RS/6000 systems. The "Diagnostics Information for Multiple Bus Systems"
contains information common to all system units and is used primarily for problem
isolation by a customer's service specialist trained on the unit being serviced.
Both publications are intended to be used in the customer's enterprise by the
customer's own service specialists, and not by IBM Service personnel.
Two wrap plugs are included for use in diagnostic testing of the following connections
to the 7043 system unit:
- RS-232 serial I/O port
- Parallel I/O port
This kit also contains system diagnostic CD-ROM for 7043 machines, along with a test
diskette, for use by the customer's service specialist (not by IBM Service personnel).
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1_
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This feature provides a hardcopy version of the options publications.
- Attributes provided: Hardcopy of options publications
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order/MES/Both/Supported: B
(For IBM US, No Longer Available as of April 15, 1997)
This feature is 1MB of synchronous L2 cache memory which provides additional
performance and may be selected in place of the standard 0.5MB L2 cache.
- Attributes provided: 1MB L2 Cache Memory
- Attributes required: L2 Socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: I
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
(For IBM US, No Longer Available as of July 18, 1997)
This feature is 1MB of synchronous L2 cache memory which provides additional
performance.
- Attributes provided: 1MB L2 Cache Memory
- Attributes required: L2 Socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: Supported
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
This feature provides 64MB of system memory (EDO DRAM, 60ns) in a Dual In-Line Memory
Module (DIMM) package. This feature may be selected in place of the standard 32MB DIMM.
- Attributes provided: 64MB system memory
- Attributes required: 1 memory slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: I
This feature provides 128MB of system memory (EDO DRAM, 60ns) in a Dual-In-Line Memory
Module (DIMM) package. This feature may be selected in place of the standard system
memory.
- Attributes provided: 128MB system memory
- Attributes required: 1 memory slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
This feature provides 16MB of system memory (EDO DRAM, 60ns) in a Dual In-Line Memory
Module (DIMM) package.
- Attributes provided: 16MB System Memory
- Attributes required: 1 Memory Slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 5)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This feature provides 32MB of system memory (EDO DRAM, 60ns) in a Dual In-Line Memory
Module (DIMM) package.
- Attributes provided: 32MB System Memory
- Attributes required: 1 Memory Slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 5)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This feature provides 64MB of system memory (EDO DRAM, 60ns) in a Dual In-Line Memory
Module (DIMM) package.
- Attributes provided: 64MB System Memory
- Attributes required: 1 Memory Slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 5)
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This feature provides 128MB of system memory (EDO DRAM, 60ns) in a Dual In-Line Memory
Module (DIMM) package.
- Attributes provided: 128MB System Memory
- Attributes required: 1 Memory Slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 6 (Initial order maximum: 5)
- OS level required: None
- Initial Order/MES/Both/Supported: B
This converter cable allows a standard 15-pin display cable to be connected to a
graphics adapter with a 13W3 connector. This feature is normally needed for use with
displays that have an integrated (captured) cable with a 15-pin D-Shell connector.
(Example 8508, 631x, 632x, 952x Displays).
- Attributes provided: Connection to display with 15-pin D-Shell connector
- Attributes required: Graphics adapter with 13W3 connector
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This cable provides three separate BNC connectors to allow many IBM and non-IBM
displays to attach to a graphics adapter with a 13W3 connector.
- Attributes provided: Connection to display with 3 BNC connectors ID bits = 0100
- Attributes required: Graphics adapter with 13W3 connector
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This display cable is required for attachment of an IBM 5081 or IBM 6091 display. The
cable is 1.8 meters (6 ft) in length.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This cable provides three separate BNC connectors to allow IBM displays to attach to a
graphics adapter with a 13W3 connector. This cable is only used with adapters that can
recognize the V110 ID bits as indicating that a 77Hz monitor (ISO) is attached.
- Attributes provided: Connection to display with 3 BNC connectors ID bits = V110
- Attributes required: Graphics adapter with 13W3 connector
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order:/MES/Both/Supported: B
The 10Base2 Ethernet transceiver is compatible with Ethernet/IEEE 802.3 transceiver
specifications and 10 MBps Ethernet CSMA/CD operation, to provide a connection to thin
Ethernet coaxial cable (10Base2). It is connected to a 15-pin DIX Ethernet connection via
a transceiver (AUI) cable and converts the signal to 10Base2. The medium connection is
made through a BNC coaxial connector.
Features include:
- Selectable SQE signal via external toggle switch
- Power LED
- Dimensions: 2-7/8 inches x 2-1/8 inches
- Attributes provided: 1 Ethernet 10Base2 connection
- Attributes required: 1 Ethernet thick connection
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order/MES/Both/Supported: B
This cable attaches displays with a 13W3 connector to a graphics adapter with a 13W3
connector.
- Attributes provided: Connection to display with 13W3 connector ID Bits = 1010
- Attributes required: Graphics adapter with 13W3 connector
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order/MES/Both/Supported: B
This cable attaches monitors with a 13W3 connector to a graphics adapter with a 15
Pin-D Shell connector.
- Attributes provided: Connection to display with 13W3 connector ID Bits = 1010
- Attributes required: Graphics adapter with 15 Pin-D Shell connector
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order/MES/Both/Supported: B
US, CAN, AP, EMEA--->
This cable attaches displays with 13W3 video connectors to graphics adapters with
15-pin connectors. There is a switch in the cable that is used to enable or disable Plug
and Play. When disabled, ID Bits are presented to the attaching system.
- Attributes provided: Connection between display and graphics adapter
- Attributes required: Graphics adapter with 15 pin D-shell connector
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---US, CAN, AP, EMEA
This converter cable attaches displays with a 13W3 connector that either are DDC
(Display Data Channel) capable or do not need ID bits to a graphics adapter with a 15-pin
D-shell connector.
- Attributes provided: Connection between display and graphics adapter
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This cable attaches displays with a 3BNC video connector to graphics adapters with a
15-pin D-shell connector.
- Attributes provided: 1 display cable
- Attributes required:1 display and 1 graphics adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order/MES/Both/Supported: B
This cable attaches displays with a 13W3 video connector that are either DDC (Display
Data Channel) capable or do not need I/O bits to a graphics adapter with a 13W3 connector.
- Attributes provided: 1 display cable
- Attributes required:1 display and 1 graphics adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order/MES/Both/Supported: B
This cable attaches displays with 13W3 video connectors to graphics adapters with 13W3
connectors. There is a switch in the cable to enable or disable plug and play. When
disabled, I/O bits are presented to the attaching system.
- Attributes provided: 1 display cable
- Attributes required:1 display and 1 graphics adapter
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 per display
- OS level required: None
- Initial Order/MES/Both/Supported: B
The PowerPC 604e 200MHz is a pluggable microprocessor which provides increased
performance and may be selected to replace the standard 166MHz microprocessor.
- Attributes provided: CPU
- Attributes required: PGA socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: I
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
This feature is a field upgrade kit which converts a 604e 166MHz Model 140 into a 604e
200MHz Model 140.
- Attributes provided: CPU
- Attributes required: PGA socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: M
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The PowerPC 604e 233MHz is a pluggable microprocessor which provides increased
performance and may be selected to replace the standard 166MHz or 200MHz microprocessor.
- Attributes provided: CPU
- Attributes required: PGA socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5; AIX 4.2.1
- Initial Order/MES/Both/Supported: Initial
This feature is a field upgrade kit which converts a 604e 166MHz or 200MHz Model into a
604e 233MHz Model.
- Attributes provided: CPU
- Attributes required: PGA socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5; AIX 4.2.1
- Initial Order/MES/Both/Supported: MES
The PowerPC 604e 332MHz pluggable microprocessor provides increased performance and may
be selected to replace the current 166MHz, 200MHz, or 233MHz microprocessors.
- Attributes provided: CPU
- Attributes required: PGA Socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: AIX 4.1.5, 4.2.1, 4.3
- Initial Order/MES/Both/Supported: Initial
This feature is a field upgrade kit which converts a PowerPC 604e 166MHz, 200MHz, or
233MHz system model into a PowerPC 604e 332MHz model.
- Attributes provided: CPU
- Attributes required: PGA Socket
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5, 4.2.1, 4.3
- Initial Order/MES/Both/Supported: MES
US, AP, LA, EMEA--->
<---US, AP, LA, EMEA
AP--->
This feature is not valid in Japan.
<---AP
US, AP, LA, EMEA--->
Licensed programs may be preinstalled on the media selected. To order this option,
specify code (#5005) on the initial system order. The preinstalled licensed programs will
be at the same release level as programs being shipped from the Program Libraries at the
time the system is manufactured. The preinstall option is available for the basic license
only and not for DSLO licenses.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: I
<---US, AP, LA, EMEA
CAN, AP--->
The most current level of the IBM AIX Version 4 Client operating system will be
preloaded on the hard disks when defined on the initial plant order.
The preload is available for the basic license only and is not for DSLO licenses. Refer
to the IBM AIX Version 4 announcement for detailed packaging and ordering information.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5
- Initial Order:/MES/Both/Supported: I
<---CAN, AP
AP--->
This feature is only valid in Japan.
<---AP
CAN, AP--->
The most current level of the IBM AIX Version 4 Server operating system for the D5
Processor Group will be preinstalled on the hard disks when defined on the initial plant
order.
The preinstall is available for the basic license only and is not for DSLO licenses.
Refer to the IBM AIX Version 4 announcement for detailed packaging and ordering
information.
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5
- Initial Order:/MES/Both/Supported: I
<---CAN, AP
(For IBM US, No Longer Available as of January 21, 1997)
The Windows NT Server Indicator is required whenever an order for Windows NT Server is
placed (using feature #5005 for software preinstall).
- Attributes provided: Windows NT Server O/S
- Attributes required: Software Preinstall feature #5005
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: Windows NT Server
- Initial Order/MES/Both/Supported: Initial Order
The 3-Button Mouse is a dynamic tracking pointing device which utilizes Opto-mechanical
technology. Resolution is 320 DPI. A 2.74 meter (9 ft) attachment cord is included.
- Attributes provided: Mouse capability
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: B
The 4GB 4mm Internal Tape Drive features up to 8GB (typical) of storage capacity with
compression in a 5.25-inch half high bay that attaches via the SCSI interface.
Characteristics:
- Non-data grade media rejection (will not write on audio grade media)
- DDS-2 data compression format
- SCSI-2 command support with single-ended SCSI-2 interface
- Synchronous and asynchronous SCSI data transfers, Streaming operation
- 4GB capacity per cartridge, 8GB w/data compression (typical)
- Data transfer rate: 400KB/sec native, 800KB/sec compressed
- 5MB/sec SCSI burst rate
- 5.25-inch half high form factor
- Attributes provided: 4mm tape capability
- Attributes required: 1 half high media bay and 1 SCSI-1 internal SE 8-bit address
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order:/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The 12/24 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 8-bit
tape drive, which provides a high capacity for save/restore and achieve functions. This
tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity
of up to 24 GB - a significant increase in capacity over the previous 4/8 GB 4-mm internal
tape drives (when using DDS-3 media).
Characteristics:
- Capacity: 12 GB native mode, 24 GB (typical) compression mode
- Form Factor: 5.25-inch half high
- Media: IBM 4-mm DDS-3 data cartridge
- Technology: Helical scan, rotating head
- Operation: Streaming
- Data Transfer Rate: 1.1 MBps native mode, 2.2 MBps (typical) compression
- Interface: SCSI-2 (single ended) asynchronous/synchronous
- Compatability: 2 GB mode (Read/Write), 4 GB compression (Read/Write); 4 GB mode
(Read/Write), 8 GB compression (Read/Write); 12 GB mode (Read/Write), 24 GB compression
(Read/Write)
- Attributes provided: 4mm tape capability
- Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE
8-bit address
- For 7043-140: (#6159)
- Minimum required: 0
- Maximum allowed: _1_ (Initial order maximum: _1_)
- OS level required: AIX 4.1.5 with APAR IX69941 or later, AIX 4.2 with APAR IX69950 or
later, AIX 4.3 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided:
The PCI Differential Ultra SCSI Adapter is the next generation
of SCSI-2 performance with maximum data transfer rates of 40 MBytes per second. Feature
code # 6207 allows connection to external differential SCSI-2 F/W or Ultra SCSI type
devices up to 25 meters away. Feature code # 6207 will negotiate with each external device
and transfer data at the fastest SCSI data transfer rate capable by the external device.
Some external IBM Differential Ultra SCSI devices include the 7137 Disk Array Subsystem
models (check sales pages) and certain External Disk Drive Models of the 7204.
The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry
standard 68 pin connectors are incorporated (SCSI "P" connector definition of
X3T9.2/90-048).
- Attributes required: Any available PCI slot.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _2_ (Initial order maximum: _2_)
- OS level required: AIX 4.1.5, AIX 4.2.0, AIX 4.2.1 or higher
- Initial Order/MES/Both/Supported: Both
The PCI SCSI-2 Fast/Wide Single-Ended Adapter (#6208) provides a single-ended SCSI-2
Fast/Wide interface that can burst data to devices on the SCSI bus at 20MB/s. This feature
can provide both internal and external device support, connected to the same SCSI bus.
- Attributes provided: Attachment of internal/external single-ended 8-bit or 16-bit SCSI
devices.
- Attributes required: 1 PCI adapter slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (AIX)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The PCI SCSI-2 Fast/Wide Differential Adapter (#6209) is a PCI adapter that provides a
differential fast/wide SCSI-2 interface. It can burst data to devices on the SCSI bus at
20MB/s.
- Attributes provided: Attachment of external differential 8-bit or 16-bit SCSI devices.
- Attributes required: 1 PCI adapter slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 2 (AIX)
- OS level required: AIX 4.1.5; Windows NT 4.0(1) (PowerPC Edition)
- Initial Order/MES/Both/Supported: B
Note: (1) Supported on systems with Windows NT installed prior to April 25,
1997. No longer available for Windows NT-based systems after December 31, 1997.
The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, can be configured as either a
two initiator non-RAID, or one initiator RAID adapter. After September 25, 1998, new
microcode will allow FC #6215 to be configured as either a eight initiator non-RAID, or
two initiator RAID adapter. It also has been enabled to support an optional 4 MByte
Fast-Write Cache card that improves write performance in both RAID 5 or Non-RAID (one
initiator configurations) operations. The PCI SSA Multi-Initiator/RAID EL Adapter, FC
#6215, has four ports, two SSA loops, and a supported configuration of 48 SSA disk drives
per loop or 96 SSA disk drives per FC #6215. The adapter supports target mode operations
and HACMP.
The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, when operated in a RAID 5
configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. The adapter
also supports Hot Spares in RAID 5 mode.
All models of the 7133 are supported as well as the 7131-405 and internal RS/6000 SSA
disk drive configurations. The SSA Fiber-Optic Extender is also supported.
- Attributes required: One PCI adapter slot
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_ (Initial order maximum: _1_)
- OS level required: AIX 4.1.5, AIX 4.2.1 or AIX 4.3.0
- Initial Order/MES/Both/Supported: Both
(For IBM US, No Longer Available as of January 30, 1998)
The IBM SSA 4-Port RAID Adapter is a Redundant Array of Independent Disks (RAID) 5
Array adapter in a single initiator per loop environment. This offers function which
provides protection to your data in the unlikely event of a disk drive failure. SSA
attachment to PCI internal system SSA storage as well as the 7131 and 7133 SSA disk drive
subsystems.
- Occupies one PCI slot (slot 2 only)
- Four external ports (two loops)
- Supports RAID 5 in single initiator, per each loop, environment
- RAID 5 Arrays from thirty-two (2+P) to six (15+P) supported
- Supports Hot Spare
- Supports non-RAID configurations
- Attachment of up to 48 SSA disk drives per loop (2-SSA loops per adapter) or a total of
96 SSA disk drives
PCI slots 2 or 3 only in the Model 140.
The SSA Fast-Write Cache Option Card, FC #6222, is a 4 MByte fast-write optional
feature that will plug into either SSA Multi-Initiator/RAID EL Adapter (FC #6215 or FC
#6219). It utilizes non-volatile RAM and has a data memory retention of over seven years.
During the unlikely event of an SSA Multi-Initiator/RAID EL Adapter failure, a new SSA
Multi-Initiator/RAID EL Adapter can be installed and the SSA Fast-Write Cache Option Card
(FC #6222) can be removed from the failing adapter and installed in the new SSA
Multi-Initiator/RAID EL Adapter insuring data integrity.
The SSA Fast-Write Cache Option Card (#6222) can provide as much as a 10-times
improvement of data throughput and response time during certain sequence write operations
compared to SSA RAID adapters without the SSA Fast-Write Cache. The response time and data
transfer improvement using the option card (#6222), will vary depending upon the data
block sizes, the percentage of sequential writes, machine type/model and application
parameters.
The SSA Fast-Write Cache Option Card (#6222) plugged into either SSA
Multi-Initiator/RAID EL Adapter (#6215 or #6219) will operate in either Non-RAID or RAID 5
mode, in a one initiator configuration.
- Attributes required: Adapter (#6215) or (#6219)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_ (Initial order maximum: _1_)
- OS level required: AIX 4.1.5, AIX 4.2.1 or AIX 4.3.0
- Initial Order/MES/Both/Supported: Both
The IBM Personal Microphone is a lightweight microphone and headset which conveniently
mounts over and behind the user's ear. The microphone element is attached to the earpiece
with a thin tubular boom. The IBM personal Microphone allows adjustments to be made to
position the microphone and headset for either the left or right ear.
The IBM Personal Microphone is a perfect addition to the microphone supplied with you
system unit. It will allow each user to have their own microphone.
The microphone is suitable for a wide range of applications but is especially suited
for speech recognition applications including dictation and navigation in an office
environment. The microphone allows consistent performance by providing for an optimum
distance the voice source and the microphone element and providing concurrent feedback to
the user via the personal headset.
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported: B
This adapter attaches IBM #9291 Single Digital Trunk Processor systems or IBM #9295
Multiple Digital Trunk Processor systems to an RS/6000 system. Each Digital Trunk Quad PCI
Adapter allows up to 96 T1 or 120 CEPT telephone channels to be attached. A maximum of two
Digital Trunk Quad PCI Adapter per RS/6000 system are supported. AIX 4.2.1 and LPP
5765-B81 DirectTalk for AIX Version 2.1 are corequisites for Digital Trunk Quad PCI
Adapter. Note: Installation of a FCC Class 'A' feature/device to a FCC Class 'B' system
will change the system FCC Class to 'A'.
- Attributes provided: Four Digital Trunk Processor system connections
- Attributes required: One PCI slot
- For 7043-140:
- Minimum required: None
- Maximum allowed: _1_ (Initial order maximum: _1_)
- OS level required: AIX 4.2.1
- Initial Order/MES/Both/Supported: Both
(For IBM US, No Longer Available as of January 8, 1998)
The IBM Amplified Speakers deliver a rich and incredible full stereo sound to the
desktop. The speakers feature a bass, treble and volume control and built in amplifier
capable of delivering 22 watts of sound(peak) per speaker. The speakers are connected to
an audio card or system thru a 3.5mm phone jack. IBM Amplified Speakers are powered by an
AC-to-DC converter.
- Attributes provided: Rich full stereo sound
- Attributes required: Functional audio subsystem and free audio jacks
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported: B
EMEA--->
(No Longer Available as of January 8, 1998)
The IBM Amplified Speakers deliver a rich and incredible full stereo sound to the
desktop. The speakers feature a bass, treble and volume control and built in amplifier
capable of delivering 22 watts of sound(peak) per speaker. The speakers are connected to
an audio card or system thru a 3.5mm phone jack. IBM Amplified Speakers are powered by an
AC-to-DC converter.
- Attributes provided: Rich full stereo sound
- Attributes required: Functional audio subsystem and free audio jacks
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of January 8, 1998)
The IBM Amplified Speakers deliver a rich and incredible full stereo sound to the
desktop. The speakers feature a bass, treble and volume control and built in amplifier
capable of delivering 22 watts of sound(peak) per speaker. The speakers are connected to
an audio card or system thru a 3.5mm phone jack. IBM Amplified Speakers are powered by an
AC-to-DC converter.
- Attributes provided: Rich full stereo sound
- Attributes required: Functional audio subsystem and free audio jacks
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---EMEA
AP--->
(No Longer Available as of January 8, 1998)
The IBM Amplified Speakers deliver a rich and incredible full stereo sound to the
desktop. The speakers feature a bass, treble and volume control and built in amplifier
capable of delivering 22 watts of sound(peak) per speaker. The speakers are connected to
an audio card or system thru a 3.5mm phone jack. IBM Amplified Speakers are powered by an
AC-to-DC converter.
- Attributes provided: Rich full stereo sound
- Attributes required: Functional audio subsystem and free audio jacks
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of January 8, 1998)
The IBM Amplified Speakers deliver a rich and incredible full stereo sound to the
desktop. The speakers feature a bass, treble and volume control and built in amplifier
capable of delivering 22 watts of sound(peak) per speaker. The speakers are connected to
an audio card or system thru a 3.5mm phone jack. IBM Amplified Speakers are powered by an
AC-to-DC converter.
- Attributes provided: Rich full stereo sound
- Attributes required: Functional audio subsystem and free audio jacks
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order:/MES/Both/Supported: B
<---AP
A third internal disk may now be installed in the available media bay with the use of
this disk mounting kit. Any valid internal disk may be installed.
- Attributes provided: 1 half high disk bay
- Attributes required: 1 half high media bay
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: B
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.3.0
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
- Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable,
removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
- Attributes required: Supported RS/6000 system with proper AIX operating system
installed.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: AIX 4.1.5, 4.2.1, or 4.3.0 or later
- Initial Order/MES/Both/Supported: Both
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: B
US, CAN, EMEA--->
(No Longer Available as of February 6, 1998)
Attributes provided: None
Attributes required: None
For 7043-140:
Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
<---US, CAN, EMEA
CAN, EMEA--->
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: 1
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---CAN, EMEA
US, CAN, EMEA--->
(No Longer Available as of February 6, 1998)
Attributes provided: None
Attributes required: None
For 7043-140:
Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Both
<---US, CAN, EMEA
CAN, EMEA--->
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---CAN, EMEA
US, CAN, LA, EMEA--->
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---US, CAN, LA, EMEA
US, CAN, AP, EMEA--->
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---US, CAN, AP, EMEA
CAN, LA--->
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---CAN, LA
US, CAN--->
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---US, CAN
CAN, EMEA--->
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---CAN, EMEA
CAN, AP--->
(No Longer Available as of March 28, 1998)
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
(No Longer Available as of February 6, 1998)
- Attributes provided: None
- Attributes required: None
- For 7043-140:
- Minimum required: 0
- Maximum allowed: _1_
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---CAN, AP
US, CAN, AP, LA--->
Abbreviated as (RAN). See #2933 (ISA) for detail.
- Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN connection
- Attributes required: 1 RAN to 128-port Controller connection OR 1 RAN-to-RAN connection
- For 7043-140:
- Minimum required: 0
- Maximum allowed: See (#2933)
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---US, CAN, AP, LA
This cable provides attachment between the 128-port Asynchronous Controller and the
first RAN in a daisy chain, or attachment between RANs in the daisy chain. See feature
(#2933) (ISA) for further information.
- Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy
chain.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: See (#2933)
- OS level required: None
- Initial Order/MES/Both/Supported: B
This cable may be substituted for the 4.5 meter (15 foot) async controller cable
whenever a customer configuration requires stacked Remote Async Nodes.
See feature (#2933) (ISA) or (#8128) (MCA) for further information.
- Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
- Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy
chain.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: See (#2933)
- OS level required: None
- Initial Order/MES/Both/Supported: B
This cable can be used to attach EIA-232 devices to the 16 port EIA 232 Remote Async
Node (FC 8130 or FC 8134) for the 128-Port Async subsystem. This cable provides a 25-pin D
shell connector for device attachment. Four cables are provided per each order.
- Attributes provided: 4 DB-25 EIA-232 ports
- Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
- For 7043-140:
- Minimum required: 0
- Maximum allowed: See (#2933)
- OS level required: None
- Initial Order/MES/Both/Supported: B
AP, LA, EMEA--->
See feature (#2933) (ISA) for further information.
- Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN connection
- Attributes required: 1 RAN-to-128-port Controller connection OR 1 RAN-to-RAN connection
- For 7043-140:
- Minimum required: 0
- Maximum allowed: See (#2933)
- OS level required: None
- Initial Order/MES/Both/Supported: B
<---AP, LA, EMEA
The 64-Port to 128-Port Pin-out Converter allows devices currently using 16-Port
Concentrators (FC 6401 - from 64-port Async Subsystem) to attach to 16-Port RANs (FC
8130/8134/8136). Quantity (4) per order.
- Attributes provided: 4 RJ-45 EIA-232 ports
- Attributes required: 4 device cables using 64-port RJ45 wiring.
- For 7043-140:
- Minimum required: 0
- Maximum allowed: See (#2933)
- OS level required: None
- Initial Order/MES/Both/Supported: B
The Rack Mountable Remote Asynchronous Node 16-Port EIA-232 (RAN) is a modified version
of the existing 16-port Remote Async Node (feature #8130 or #8134) in an industry-standard
19-inch rack mount chassis to allow simpler installation and ease-of-use. Like the
existing RAN, it can also be configured as a desktop device.
As an additional benefit, the new metal chassis meets FCC Class B/CISPR B when used
with similarly rated RS/6000 host to meet the needs of customers with these requirements.
The RANs provide 16 ports of EIA-232 capability with full modem controls on each port
and are connected to the 128-port Async Controller (Micro Channel or ISA versions)
residing in the host. RANs are connected in daisy-chain fashion up to 8 RANs per 128-port
Async Controller (either version).
The new rack-mountable RAN offers these enhanced features:
- Industry-standard 19-inch rack mountable chassis (can be configured for stacking on a
desktop or mounted in a 19-inch rack).
- Meets FCC Class B/CISPR B when used with similarly rated RS/6000 host.
- All RJ-45 connectors are now on the front panel, greatly enhancing cable management.
- The DB-15 synchronous connectors (cabling from host to RAN and between RANs) and the
power cord and switch are located on the rear panel.
- Power supply is self contained within the unit.
The new rack-mountable RAN offers these same features as the existing RAN product:
- Identical function and support as existing 16-port Remote Async Node (RAN), feature
#8130 or #8134.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with
either a Micro Channel or ISA host adapter.
- Ability to monitor individual port operation, synchronous line station, and other
diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR,
DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order)
currently used on the existing RANs can be used to attach devices having a DB-25 connector
to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of 62 meters (200 feet).
- Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter),
feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 330 meters from the host using standard shielded 8-wire twisted
pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the distance and allows
location of RANs at geographically distant location from the host.
- Attributes provided: 16 RJ-45 EIA-232 ports AND 1 RAN-to-RAN connection
- Attributes required: 1 RAN-to-128-port Controller connection OR 1 RAN-to-RAN connection
- For 7043-140:
- Minimum required: 0
- Maximum allowed: See (#2933)
- OS level required: None
- Initial Order/MES/Both/Supported: B
The tie-down strap is used as an aid in securing the system unit and connects the
system unit via a cable to a more secure item such as a desk, wall fixture, etc.
- Attributes provided:
- Attributes required:
- For 7043-140:
- Minimum required: 0
- Maximum allowed: No maximum
- OS level required: None
- Initial Order:/MES/Both/Supported: B
Provides remote connection of up to 16 EIA-232 devices to a 128-Port Asynchronous
Controller.
Each port can be individually programmed to provide a asynchronous connection of 230
Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be
supported at this baud rate. When connected to the newly announced PCI controller, a
synchronous channel data rate of 2.4 Mbps is used. If connected to the existing MCA or ISA
controllers, the synchronous channel runs at the previous 1.2 Mbps data rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with
either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line station, and other
diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR,
DCD, DTR, RI.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order)
currently used on the existing RANs can be used to attach devices having a DB-25 connector
to the Remote Async Nodes.
- Individual ports support a maximum EIA-232 distance of up to 31 meters (100 feet),
depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter),
feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 90 meters (sync data rate set at 2.4 Mbps) from host using
standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the distance and allows
location of RANs at geographically distant location from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One (#2944) per eight (#8137)s
- For 7043-140:
- Minimum required: None
- Maximum allowed: _40 (Initial order maximum: _40)
- OS level required: AIX 4.2.1 or AIX 4.3
- Initial Order/MES/Both/Supported: Both
Provides remote connection of up to 16 RS-422 devices to a 128-Port Asynchronous
Controller.
Each port can be individually programmed to provide a asynchronous connection of 230
Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be
supported at this baud rate. When connected to the newly announced PCI controller, a
synchronous channel data rate of 2.4 Mbps is used. If connected to the existing MCA or ISA
controllers, the synchronous channel runs at the previous 1.2 Mbps data rate.
- Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with
either a Micro Channel, ISA or PCI host adapter.
- Ability to monitor individual port operation, synchronous line station, and other
diagnostics from front panel.
- Built-in diagnostics can test ports independent of RS/6000 host.
- Supports the following interface signals: +TxD, +RxD, -TxD, -RxD.
- The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order)
currently used on the existing RANs can be used to attach devices having a DB-25 connector
to the Remote Async Nodes.
- Individual ports support a maximum RS-422 distance of up to 1200 meters (3930 feet),
depending on the baud rate.
- Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter),
feature #8132 (23 cm) or customer supplied cables.
- Location of RAN up to 90 meters (sync data rate set at 2.4 Mbps) from host using
standard shielded 8-wire twisted pair cabling.
- Remote operation via synchronous modems or CSU/DSU extends the distance and allows
location of RANs at geographically distant location from the host.
- Attributes provided: 16 EIA-232 Async ports
- Attributes required: One (#2944) per eight (#8138)s
- For 7043-140:
- Minimum required: None
- Maximum allowed: _40 (Initial order maximum: _40)
- OS level required: AIX 4.2.1 or AIX 4.3
- Initial Order/MES/Both/Supported: Both
Not available.
None.
None.
None.
None.
None.
(R), (TM), * Trademark or registered trademark of International Business Machines
Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Windows is a trademark of Microsoft Corporation.
UNIX is a registered trademark in the United States and other countries licensed
exclusively through X/Open Company Limited.
Back